1150W HPS Double-Ended Bulb (12/cs)

Ushio • HiLUX™ GRO AHS-DE1150W/INTENSE High pressure sodium lamp for plant growth.Efficient grow lighting for professional greenhouses and turf lighting. • Best-in-class photosynthetically active radiation (PAR): 2 400...

600W HPS Pro Plus Double-Ended Lamp

USHIO Hilux Gro™ 600W Double-Ended HPS Grow LightsUshio America is proud to introduce new 600W DE HPS lamps to its Hilux Gro™ professional-grade horticulture grow lights series. Specifically designed and rated for use in open fixtures, these...

600W MH Double-Ended Lamp

USHIO Hilux Gro™ 600W Double-Ended Metal Halide Grow LightsUshio America is proud to introduce new 600W DE Metal Halide lamps to its Hilux Gro™ professional-grade horticulture grow lights series. Specifically designed and rated for use in...

PH DE Short Wire Hangers Gen III (Shorter Bal/Extr)

PH Dual 315W CMH 277-347V System wo/Bulb wo/cord

PH DE Universal Truss Hanger Bracket Gen III

Designed to easily mount your Phantom DE fixture from Unistrut or greenhouse C-channel strut for secure, level suspension.Accommodates trusses up to 2 1/2" wide.Works with all GENIII Phantom DE series ballast  

DE 1000W 120/240V Enclosed LP Commercial System

Phantom DE 1000 LP is designed and built for low profile applications were overhead clearance is limited. Phantom DE 1000 LP Lighting System features proprietary Phantom reflector designs that uniformly deliver optimum PPFD over a broad footprint...

DE 1000W 240V Commercial Enclosed System No Lamp

The Commercial DE Enclosed Lighting System features state-of-the-art double-ended technology that uniformly delivers optimum PAR value over a broad footprint. At the heart of this system is the PHB5015 Phantom Commercial DE Ballast with USB Interface...

DE 1000W 240V Open Commercial System No Lamp

PHB5015 Ballast features: USB interface provides full compatibility with Autopilot PX1 series Digital Lighting Controller High-precision microprocessor control Six-way wattage output control: 600W, 750W, 825W, 1000W, and 1150W + PX1 control...

Extreme Duty 3.0, 3.5 and 4.0 Trolley Wheel Kit

A suggested upgrade item for moving multiple lights and/or overweight loads such as heavier LED, plasma, or any light with an internal ballast weighing 35 pounds or more. They are engineered with steel on steel ball bearing with a nylon over molded tire...

LR3 Drive Wheel O-Ring Kit

Drive Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0. This is great for DIY customers. The Drive Wheel Kit comes packaged with a new tension spring and fasteners in a header labeled zip lock with instructions. Drive Wheel O-Ring Kit (Tension...

Add A Lamp Hardware Kit, trolley+mounting hardware

The Add A Lamp Hardware Kit includes a trolley and mounting hardware. It is used to hang additional crossbars or reflectors. It can also be used to festoon your power cords or cooling ducts.Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is...

6' Add A Lamp Slave (6' Push Rod/6' Rail)

6' Add A Lamp Slave (6' Push Rod/6' Rail). Move your lights back and forth across your growing area with a light mover. It helps to increase your light coverage area. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs Does not include...

Light Rail 5, Motor, Crossbar, 8' rail

LightRail 5 Commercial Drive 4 RPM kit   From its “triple duty” extruded aluminum track, “wide and stable” carriage with “steel-on-steel” carrier bearings to the high torque 4 RPM instrument grade drive motor with...

Light Rail 5, 4 foot auxilary rail

LightRail 5 Auxiliary Rail   This is used with LightRail 5 and a second Add a Bar Kit (AAB KIT LR5), see item “R”, to accommodate a 3 crossbar system. The LightRail 5 Auxiliary Rail Item is packed in a tube with installation hardware and...

Light Rail 5 Add-A-Bar Kit

The Light Rail 5 Add-A-Bar kit allows for an additional (3) light maximum expansion to existing Light Rail 5 complete systems. Add-A-Bar kits may need an additional 4' Auxiliary rail (LR5AUXRAIL) for systems that demand more than 2 total crossbar...

LightRail 4.0 AdjustaDrive Motor w/ Rail

The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. With both a zero to 60 second adjustable time delay for promoting even growth from end to end and a two to four feet per minute adjustable speed...

LightRail 4.0 Adjusta-Drive Motor

This item is a replacement motor for the LightRail 4.0 AdjustaDrive light mover. It has both a 0- to 60-second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute adjustable speed...

LR4 Kit w/ Add A Lamp Kit + TW ED pre-installed/1

LightRail 4.20 AdjustaDrive Kit comes complete with a variable speed LightRail 4.0 AdjustaDrive Motor, a two-piece 2 meter (6’6”) Rail, an Add A Lamp Kit with another 2-meter Rail, Push/Pull Rod, Auxiliary Trolley, instructions and hardware...

6' rail only

Normally a component in the LightRail Complete Kit, this 6' auxiliary rail can be used for extending the travel length of your LightRail setup by 6'.

3' extender rail

3-foot extension rail to extend a six-foot rail system to nine feet. 3 alignment pins & necessary mounting hardware included.

Robo Stick lamp stabilizer

RoboStik For LightRail 3.0, 3.5 and 4.0   The RoboStik is used for hanging a horizontal reflector from a LightRail 3.0, 3.5 or 4.0 perpendicular to the direction of travel. This item is not needed when hanging a horizontal reflector parallel to...

9 RPM Light Rail Complete Kit

For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 3.5 Intelli-Drive is without question the finest linear lamp mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot...

10 RPM Intelli-drive motor w/ 0-60 sec. time delay

LightRail 3.5 IntelliDrive 10 RPM motor travels approximately 4 feet per minute and has a 0-60 second adjustable time delay for pausing the lamp at the ends of its travel. This helps to promote even growth from end to end and allows for equal...

Jump Start Light Timer System, 2 ft. Stand,Fixture,Tube

When germinating seeds, the fixture can be kept just inches away from the seeds (or humidity dome). After sprouting, keep the fixture 3-6" away from the plant canopy.The built-in timer allows you to easily set a 12 hours on/12 hours off schedule or an 18...

T5 Strip Fixture w/Lamp and Timer 2ft

The Jump Start Modular T5 Strip Fixture with Timer is perfect for giving beneficial light to seed starts, cuttings, herbs and more. This high-output, energy efficient T5 system ensures that your plants get the light they need for robust growth. The...

T5 Strip/Ref Fixture w/Lamp and Timer 2ft

The Jump Start Modular T5 Light Strip & Snap-On Reflector with Timer is perfect for giving beneficial light to seed starts, cuttings, herbs and more. This high-output, energy efficient T5 system ensures that your plants get the light they need for...

T5 Strip/Ref Fixture w/Lamp and Stand 2ft

The JSFC2KT Jump Start Standing Lighting System is specifically designed to stand on its own over your plants. It is perfect for giving beneficial light to seed starts, cuttings, herbs and more. The 2' 24W T5 fluorescent tube and built-in reflector...

T5 Strip/Ref Fixture w/Lamp and Timer 18"

The Jump Start Modular T5 Light Strip & Snap-On Reflector with Timer is perfect for giving beneficial light to seed starts, cuttings, herbs and more. This high-output, energy efficient T5 system ensures that your plants get the light they need for...

T5 4Ft 8 Tube Fixture w/o Bulbs 120-277V

Agrobrite T5 4' 8-Tube Fixture – 277V Fixture OnlyThese systems allow you to choose multiple hanging configurations to meet your garden’s design. They combine premium grade specular aluminum with energy-efficient/high-output T5 tubes and put...

PHOTOBIO TX 680W 100-277V S4 +10' Leads Cord

PHOTOBIO•TX high efficiency LED top light is designed for greenhouse and indoor applications. The slim design minimizes sun interference while providing greater access to the plant canopy. The ultra-effective commercial design utilizes a closed...

Gavita 300CM Ferrite Cord L7 4770-C 15 Amp Plug

These upgraded 16 ft/5 m 240 volt IEC cord sets with ferrite are for use with the Gavita E-Series fixtures (Part Number 906045, 906086, 906087, 906088, 906089 and  906097).