Quick view Details LightRail | sku: LRAALHDWARE Add A Lamp Hardware Kit, trolley+mounting hardware View Details
Quick view Details LightRail | sku: LR3.5ID9 10 RPM Intelli-drive motor w/ 0-60 sec. time delay View Details
Quick view Details LightRail | sku: LRTRAUXLR3.5 Auxilliary Trolley for LR3.5 (Slave Trolley) View Details
Quick view Details Fast Fit | sku: HGC706111 Fast Fit Rolling Bench Height Reduction Kit 4 in Leg View Details
Quick view Details Fast Fit | sku: HGC706113 Fast Fit Rolling Bench Tray Stand 4 ft x 8 ft (2 Boxes) View Details
Quick view LightRail | sku: LRDWORKIT LR3 Drive Wheel O-Ring Kit Drive Wheel Replacement Kit for LightRail 3.0, 3.5 and 4.0. This is great for DIY customers. The Drive Wheel Kit comes packaged with a new tension spring and fasteners in a header labeled zip lock with instructions. Drive Wheel O-Ring Kit (Tension... View Details
Quick view LightRail | sku: LRAALHDWARE Add A Lamp Hardware Kit, trolley+mounting hardware The Add A Lamp Hardware Kit includes a trolley and mounting hardware. It is used to hang additional crossbars or reflectors. It can also be used to festoon your power cords or cooling ducts.Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is... View Details
Quick view LightRail | sku: LR5AUXRAIL Light Rail 5, 4 foot auxilary rail LightRail 5 Auxiliary Rail This is used with LightRail 5 and a second Add a Bar Kit (AAB KIT LR5), see item “R”, to accommodate a 3 crossbar system. The LightRail 5 Auxiliary Rail Item is packed in a tube with installation hardware and... View Details
Quick view LightRail | sku: LR5AABKIT Light Rail 5 Add-A-Bar Kit The Light Rail 5 Add-A-Bar kit allows for an additional (3) light maximum expansion to existing Light Rail 5 complete systems. Add-A-Bar kits may need an additional 4' Auxiliary rail (LR5AUXRAIL) for systems that demand more than 2 total crossbar... View Details
Quick view LightRail | sku: LR4ID6 LightRail 4.0 Adjusta-Drive Motor This item is a replacement motor for the LightRail 4.0 AdjustaDrive light mover. It has both a 0- to 60-second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute adjustable speed... View Details
Quick view LightRail | sku: LR3.5RB Robo Stick lamp stabilizer RoboStik For LightRail 3.0, 3.5 and 4.0 The RoboStik is used for hanging a horizontal reflector from a LightRail 3.0, 3.5 or 4.0 perpendicular to the direction of travel. This item is not needed when hanging a horizontal reflector parallel to... View Details
Quick view LightRail | sku: LR3.5ID9KIT 9 RPM Light Rail Complete Kit For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 3.5 Intelli-Drive is without question the finest linear lamp mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot... View Details
Quick view LightRail | sku: LR3.5ID9 10 RPM Intelli-drive motor w/ 0-60 sec. time delay LightRail 3.5 IntelliDrive 10 RPM motor travels approximately 4 feet per minute and has a 0-60 second adjustable time delay for pausing the lamp at the ends of its travel. This helps to promote even growth from end to end and allows for equal... View Details
Quick view Lighting Components | sku: MS430020 Reflector Hanging Hooks This is a universal replacement V hanging hook for Sun System® brand reflectors and fixtures. View Details
Quick view LightRail | sku: LRTRAUXLR3.5 Auxilliary Trolley for LR3.5 (Slave Trolley) Auxilliary Trolley for LR3.5 (Slave Trolley)Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs View Details
Quick view LightRail | sku: LR122 Light Rail screw with thumb nut, pack of 6 Switch Stop Kit for LightRail 3.0, 3.5 and 4.0 For replacing the occasional misplaced switch stop. The SS KIT comes with 3 pairs of switch stops and that equals 6 thumb screws and 6 slide nuts. Packaged in a 4" x 4" ziplock. Light Rail 3.5 is rated... View Details
Quick view Fast Fit | sku: HGC706147 Fast Fit Trellis Support 4 Piece The Fast Fit® Trellis Support System securely and easily attaches to your Fast Fit® tray stands. Made of the same great quality materials with heavy-duty 1 in box steel that is powder-coated for durability. Each pole measures 4 ft in height and comes... View Details
Quick view Fast Fit | sku: HGC706111 Fast Fit Rolling Bench Height Reduction Kit 4 in Leg These 4 in legs reduce the overall height of the Fast Fit® Rolling Bench Tray Stand 4 ft x 8 ft (#706113) from 27.25 in to 13.125 in. Screw pack included. View Details
Quick view Fast Fit | sku: HGC706113 Fast Fit Rolling Bench Tray Stand 4 ft x 8 ft (2 Boxes) The Fast Fit® Rolling Bench 4 ft x 8 ft is a great solution to maximize your grow room space. This unique design allows the tabletop to smoothly roll from side to side, eliminating the need for multiple aisles between each row. This rolling bench system... View Details