Advanced Nutrients Revive – 500mL

Advanced Nutrients Revive – 500mL is a concentrated emergency recovery additive designed to correct nutrient deficiencies quickly. It delivers nitrogen, calcium, magnesium, chelated iron, and chelated zinc — the nutrients most commonly tied to sudden plant stress — directly through the root zone or leaf surface, giving affected crops the best chance to recover and continue producing.

Advanced Nutrients Revive – 500mL Specifications

The table below lists the confirmed specifications for Revive 500mL, drawn from the product’s supplier listing and canonical attributes.

Specification	Value
Brand	Advanced Nutrients
Product Name	Revive
Volume	500 mL
Shipped Weight	3.00 lb (approx.)
Key Nutrient Profile	Nitrogen, Calcium, Magnesium, Chelated Iron, Chelated Zinc
Application Method	Nutrient solution additive or foliar spray
Formulation Type	Liquid concentrate
Supplier SKU	C811035

Why Choose Advanced Nutrients Revive – 500mL

Revive is formulated specifically for the emergency phase: when plants show signs of deficiency and you need them to recover before the problem compounds. Here is what separates it from general-purpose nutrient top-ups:

• Targets the five most common deficiency culprits at once. Nitrogen, calcium, magnesium, chelated iron, and chelated zinc are the nutrients most frequently implicated in sudden crop stress. Revive supplies all five in a single formula rather than requiring you to diagnose and treat each deficiency separately.
• Two delivery routes — root zone and foliar. You can add Revive directly to your nutrient solution to correct the reservoir, or dilute it as a foliar spray to get nutrients into the plant through the leaves when root uptake is compromised. Using both routes simultaneously can accelerate recovery time.
• Chelated iron and zinc for reliable uptake. Iron and zinc are often present in a nutrient solution but unavailable to plants due to pH lock-out. Chelation keeps these micronutrients in a plant-accessible form across a wider pH range, so they reach the plant’s vascular system even when conditions are not ideal.
• Fast distribution through the vascular system. According to Advanced Nutrients, the active compounds in Revive move quickly from roots or leaves into the plant’s vascular system, distributing the corrective nutrition where it is needed rather than staying localized at the application site.
• 500 mL size suits small to mid-size operations. The 500 mL bottle is practical for growers who keep Revive on hand as an insurance product. Because it is used reactively rather than as part of every feed, a 500 mL bottle will last through multiple growing cycles in most setups.

Best Uses for Advanced Nutrients Revive – 500mL

Revive is an additive, not a base nutrient. It is designed for reactive use — applied at the first signs of trouble — rather than as a routine feed component. The following situations represent the primary use cases grounded in the product description:

• Recovering plants after a nutrient solution failure. If a reservoir runs dry, a pump fails, or base nutrient ratios are accidentally thrown off, plants can show deficiency symptoms within hours. Adding Revive to the corrected nutrient solution immediately after restoring normal feed conditions helps bridge the recovery period.
• Addressing yellowing, interveinal chlorosis, or tip burn. These visual symptoms often indicate calcium, magnesium, or iron shortfall. Applying Revive as a foliar spray while also correcting the root-zone solution provides a two-front approach that can halt symptom progression more quickly than a reservoir adjustment alone.
• Stabilizing plants during environmental stress events. Heat spikes, cold snaps, or disruptions to the grow environment can cause plants to lock out certain nutrients even when the solution is correctly formulated. Revive’s chelated mineral blend is more tolerant of these conditions and can help maintain plant health during the recovery window.
• Complementing a root health program. If you are already running a root inoculant or beneficial bacteria product such as Advanced Nutrients Tarantula to build root mass, Revive can be used alongside it when roots show signs of poor uptake — the microbial population supports long-term root health while Revive addresses the immediate nutritional gap.
• Insurance stock for any hydroponic or coco system. Because nutrient deficiencies can arise from equipment failures or unexpected fluctuations, many growers keep a bottle of Revive in their grow room before they need it. The 500 mL size is compact enough to store without dedicated shelf space.

Advanced Nutrients Revive vs Similar Recovery Additives

Revive competes in the emergency-recovery additive segment alongside products like Cal-Mag supplements and multi-mineral correctors. The distinctions worth knowing before buying:

Revive vs Cal-Mag-only products: Standard Cal-Mag supplements typically address calcium and magnesium deficiencies, and some add a small amount of iron. Revive extends this to include nitrogen and chelated zinc as well. If your deficiency is clearly calcium or magnesium alone, a dedicated Cal-Mag may be sufficient and more economical per dose. If the deficiency pattern is less clear — which is common when plants are under acute stress — the broader spectrum in Revive reduces the risk of missing a contributing factor.

Revive vs general foliar feeds: Many general-purpose foliar feeds are dilute nutrient solutions intended for regular application throughout the grow cycle. Revive is a concentrated emergency formula and is applied reactively, not on a regular schedule. The concentration difference matters: do not substitute Revive for a routine foliar program or apply at the same rate you would a standard foliar product.

Revive vs flushing before a new feed program: Some growers respond to deficiency symptoms by flushing the medium and starting fresh with a corrected solution. Flushing addresses the root zone but leaves the plant without immediate nutrition during the flush period. Using Revive as a foliar spray during or immediately after a flush can keep the plant supplied while the root zone is being reset.

If you are looking at broader crop health support — including pest and disease pressure as well as nutritional maintenance — PureCrop1 is a separate product in the Nutrients & Additives category worth reviewing.

Compatibility

Revive is a liquid concentrate formulated for hydroponic and soil-based growing systems. The following compatibility notes are based on the product description and the dual-application method stated by the manufacturer:

• Growing media: Compatible with hydroponic reservoirs (DWC, recirculating drip, NFT, ebb-and-flow), coco coir, and soil or soilless mixes. The foliar application route is media-agnostic.
• Base nutrient lines: Revive is an additive, not a replacement for a base nutrient program. It is intended for use alongside any base nutrient line, including other Advanced Nutrients products, when a deficiency correction is needed.
• Root zone additives: Can be run alongside root-health inoculants. If you are using a beneficial microbial product like Advanced Nutrients Tarantula for root colonization, Revive’s chelated mineral profile is generally compatible with beneficial bacteria and mycorrhizae — concentrated nutrient additives can temporarily affect microbial populations, so introduce Revive at the first sign of deficiency rather than as a preventive measure.
• System type: Suitable for recirculating and run-to-waste systems. In recirculating systems, add Revive to the reservoir at the recommended dose and monitor EC after mixing to ensure the total concentration stays within range for your crop and growth stage.

Usage Guidelines

Revive is a concentrated additive. The core guidance from the manufacturer is to apply it at the first sign of trouble — do not wait for deficiency symptoms to advance. Two delivery methods are supported:

Nutrient solution method: Measure the recommended dose of Revive per gallon or litre of nutrient solution and add it to your reservoir or mixing tank. Stir or circulate thoroughly after adding. Check EC after mixing to ensure the addition does not push the solution above the target EC for your crop’s current growth stage. Continue monitoring plant response over the following 24–72 hours.

Foliar spray method: Dilute Revive in clean, pH-adjusted water at the appropriate rate. Apply to leaf surfaces, coating both the upper and lower sides of leaves where possible. Foliar application allows nutrients to enter the plant’s vascular system through the leaf tissue, which can be faster than root uptake when root function is impaired. Apply foliar sprays during lights-off or in lower-light conditions to minimize the risk of leaf burn from the concentrate.

Timing: Apply at the first sign of deficiency symptoms. According to Advanced Nutrients, timing is the most important factor in effective recovery — early intervention with Revive gives crops the best chance to not only recover but to continue progressing toward yield targets. Do not delay application while waiting to confirm the exact deficiency; the broad-spectrum formula addresses the most common causes simultaneously.

Note on specific dosing rates: Advanced Nutrients publishes dosing rates on the product label and on their website. Confirm current label rates before application, as concentration and dosing guidance may vary by formulation batch.

How to Apply Advanced Nutrients Revive

1. Identify the problem early. Check plants daily for yellowing leaves, interveinal chlorosis, brown leaf edges, or stunted new growth — the visual cues that indicate one or more of the deficiencies Revive addresses. The sooner you act, the more effective the application.
2. Shake the bottle well. Revive is a liquid concentrate. Invert and shake before each use to ensure even distribution of the active components throughout the solution.
3. Measure the correct dose. Use a calibrated syringe or measuring cup. Refer to the current product label for the recommended ml-per-gallon (or ml-per-litre) rate. Do not estimate by eye with a concentrated formula.
4. Choose your delivery method. For root-zone application, add the measured dose directly to your nutrient reservoir or mixing tank, then circulate or stir. For foliar application, dilute in pH-adjusted water (target pH 6.0–6.5 for foliar) in a clean spray bottle or pressure sprayer.
5. Apply and monitor EC. After adding Revive to the reservoir, check and record the EC. If it has risen above your target range, dilute with plain pH-adjusted water before feeding. For foliar, apply a fine mist to leaf surfaces; avoid run-off pooling at the growing medium surface.
6. Observe plant response. Check treated plants after 24 hours. Foliar-applied nutrients can produce visible improvement within 24–48 hours in many cases. Root-zone corrections may take 48–72 hours to show visible improvement depending on root health and the severity of the original deficiency.
7. Reassess and continue normal feeding. Once plants show signs of stabilization, return to your regular base nutrient program. Revive is not a long-term feed replacement — it is a recovery tool. If deficiency symptoms persist after two or three applications, revisit your base nutrient formula, pH calibration, and root health.

Sources & Further Reading