The Anden Hanging Kit is a suspension kit that hangs an A70-series Anden dehumidifier overhead instead of setting it on the floor. Anden publishes this kit as designed for use with Anden A70 and A100 dehumidifiers, with a total safe working load of up to 400 pounds and suspension bars made from 14-gauge zinc-plated steel. This page gives the maker’s published load rating, bar material, dimensions, and included hardware, and is honest about the details Anden does not restate for this store’s A70 & A95(F) designation. It is a mounting accessory, not a dehumidifier — the unit is bought separately.
What it is
The Anden Hanging Kit is a factory suspension kit for hanging an A70-series Anden dehumidifier from the ceiling or an overhead structure, freeing the floor space the unit would otherwise occupy in a grow room or greenhouse. Anden states the kit is designed for use with Anden A70 and A100 dehumidifiers, with suspension bars formed from 14-gauge zinc-plated steel and a combined safe working load of up to 400 pounds. It is a hardware bundle — bars, cables, pads, and fasteners — and does not include the dehumidifier.
Specifications and what’s in the box
| Product type | Overhead suspension (hanging) kit for an Anden dehumidifier |
|---|---|
| Maker-stated compatibility | Anden A70 and A100 dehumidifiers |
| Safe working load (total) | up to 400 pounds |
| Suspension bar material | 14-gauge zinc-plated steel |
| Footprint (length × width) | 29.125″ × 18″ |
| Inside rail width | 6.8125″ |
| Outside rail width | 13.8125″ |
| Included hardware | 10-foot cables with cripple clamps and 3.5 inch bolts, 1/4-inch thick neoprene pads for vibration insulation, 8 flat washers, 8 hex nuts, and a Gripple key for installation |
The maker’s “Includes” list bundles 10-foot suspension cables with cripple clamps and 3.5 inch bolts, 1/4-inch neoprene vibration-isolation pads, 8 flat washers, 8 hex nuts, and a Gripple key, so the kit ships ready to rig without sourcing separate cable, clamps, or fasteners.
Why choose it
- Factory-matched to the dehumidifier. Rather than improvising a shelf or a third-party bracket, this is Anden’s own kit, stated to be designed for use with Anden A70 and A100 dehumidifiers, so the rail spacing matches the unit’s mounting points.
- Rated load headroom. The 400-pound total safe working load is well above the weight of an A70-class dehumidifier, giving margin over the hung unit’s operating weight.
- Rugged bars. The suspension bars are 14-gauge zinc-plated steel, a heavy gauge with a corrosion-resistant plating suited to a humid grow environment.
- Vibration isolation included. The kit ships with 1/4-inch neoprene pads for vibration insulation, which help keep compressor and fan vibration from transmitting into the structure.
- Frees floor space. Hanging the unit overhead clears bench and aisle space in a tight grow room or greenhouse, which is often the reason to buy a hanging kit at all.
Best uses
- Overhead-mounting an A70-class Anden dehumidifier where floor or bench space is scarce and the ceiling structure can carry the load.
- Grow rooms and greenhouses that route conditioned air from above, keeping the dehumidifier up out of the canopy zone and the walkway.
- Installs onto a rated overhead structure — the cables and bolts anchor to a ceiling joist, purlin, or unistrut that you have confirmed will bear the suspended weight.
Compatibility
Anden ties each hanging kit to a specific dehumidifier class. The kit whose specifications are given here is designed for the Anden A70 and A100 dehumidifiers. A separate Anden hanging kit is published for the larger Anden A130 dehumidifier, so match the kit to your exact unit. This store lists the kit for the A70 & A95(F) models; the A95 and A95F are an earlier Anden model designation, and the maker page read for this build does not restate A95/A95F compatibility (see Honest fit).
How it compares to other mounting options
This table is factual — it maps the options, not a ranking. Which suits you depends on your ceiling structure and unit.
| Factor | Anden A70/A100 hanging kit | Anden A130 hanging kit | Floor / shelf placement |
|---|---|---|---|
| Target unit | Anden A70 and A100 | Anden A130 | any unit, if floor space allows |
| Suspension bar | 14-gauge zinc-plated steel | maker spec not read this session (HELD) | none |
| Rated load | up to 400 pounds | maker spec not read this session (HELD) | floor-limited |
| Floor space | freed | freed | occupied |
Where it fits
For other mounting and suspension hardware, browse the hangers, ratchets & mounting category. Related mounting and suspension products include:
- Quest Overhead Hanging Bracket (Dual) — an overhead mounting bracket for Quest dehumidifiers, the closest cross-brand analogue.
- Hurricane Replacement Wall-Mount Bracket (18" fan) — a wall-mount bracket for suspending air-movement gear.
- Schaefer Wall-Mount Adjustable Mount (20–30" fans) — an adjustable wall mount for larger fans.
- Schaefer VK12 Fan Mount — a compact fan mount in the same category.
- Plant Yoyo Nie-Co-Rol (100 pk) — retractable plant-support hangers for the canopy.
Frequently asked questions
Which dehumidifiers does it fit? Anden states the kit is designed for use with the Anden A70 and A100 dehumidifiers. This listing is designated for the A70 & A95(F); confirm your exact model before ordering.
How much can it hold? A total safe working load of up to 400 pounds.
What comes in the box? 10-foot cables with cripple clamps and 3.5 inch bolts, 1/4-inch neoprene vibration pads, 8 flat washers, 8 hex nuts, and a Gripple key. The dehumidifier itself is not included.
What are the rail dimensions? The footprint is 29.125″ × 18″, with an inside rail width of 6.8125″ and an outside rail width of 13.8125″.
Who this is for — and who should skip it
Suited: owners of an A70-class Anden dehumidifier who want to hang the unit overhead on the maker’s own suspension kit, with a 400-pound rated load and a ceiling structure confirmed to bear it.
Not for / its limits: it is a mounting accessory, not a dehumidifier — the unit is bought separately. It is matched to a specific dehumidifier class, so it is not a universal bracket, and a larger unit such as the A130 uses a different Anden kit. You must verify your own overhead structure carries the suspended weight; the maker rates the kit, not your ceiling.
HELD (not stated because not sourced): whether this store’s A70 & A95(F) listing is Anden’s model 5660 specifically; explicit maker confirmation that this exact kit fits the A95 / A95F (the maker page read this session lists the A70 and A100 — A95/A95F are an earlier model designation not restated on that source); the kit’s own shipping weight; the maker SKU / part number; any warranty term (held per policy); and the live retail price (the storefront price field is the source of truth at deploy).
Ready to hang your dehumidifier? Add to cart, or talk to a grower about matching the kit to your exact Anden model and ceiling.
Sources
- Anden — 5660 Hanging Kit accessory page (HTTP 200, retrieved 2026-07-08 via WAF-immune fetch_maker; PRIMARY source): “designed for use with Anden A70 and A100 Dehumidifiers with a total safe working load of up to 400 pounds”; suspension bars “14 gauge zinc plated steel”; Includes 10-foot cables with cripple clamps and 3.5 inch bolts, 1/4-inch thick neoprene pads, 8 flat washers, 8 hex nuts, Gripple key; Dimensions Length x Width 29.125″ x 18″, Inside Rail Width 6.8125″, Outside Rail Width 13.8125″: https://www.anden.com/products/accessories/anden-5660-hanging-kit/
- Anden — 5691 Hanging Kit accessory page (HTTP 200, retrieved 2026-07-08; corroborates that Anden publishes a separate hanging kit for the A130 dehumidifier — comparison / compatibility point): https://www.anden.com/products/accessories/anden-5691-hanging-kit/
Reviews
There are no reviews yet.