The Botanicare Low Tide Tray 1 ft x 4 ft in black is a narrow, low-profile grow tray built from extra-thick, high-impact ABS plastic with UV inhibitors. At 48 inches long and just over 14 inches wide, it fits on shelving units, narrow benches, and vertical rack systems where a standard square tray would not. The diagonal drainage grid directs runoff toward the bulkhead recess to reduce standing water and salt buildup, while the 3.5-inch sidewalls keep the profile compact enough for multi-tier configurations. Constructed from at least 80% recycled materials, BPA-free, and manufactured in the USA using renewable solar energy.
Botanicare Low Tide Tray 1×4 Specifications
The specifications below are drawn from the official Botanicare product page, the primary supplier listing at Greener Gardens, and confirmed third-party retailer data. All dimensions and capacities are specific to the 1 ft x 4 ft size in this listing.
| Specification | Value |
|---|---|
| Brand | Botanicare (Sunlight Supply / Hawthorne Gardening Company) |
| Color | Black |
| Outside dimensions (L x W x H) | 48 in x 14.25 in x 4 in |
| Inside dimensions (L x W x H) | 46.5 in x 12.5 in x 3.625 in |
| Sidewall height | 3.5 in (low-profile with trimmed edges) |
| Volume capacity | 7.5 gallons |
| Weight | 5.0 lb |
| Material | Extra thick, high-impact ABS plastic with UV inhibitors and smooth finish |
| Recycled content | At least 80% recycled materials |
| BPA-free | Yes |
| Manufacturing | Made in the USA using renewable solar energy |
| Drainage design | Diagonal drainage grid directing water toward bulkhead recess |
| Form factor | Narrow and elongated; fits shelving units, vertical racks, narrow benches |
| Product line | Botanicare Low Tide (also available in 2×8, 3×3, 4×4, and 4×8 sizes) |
Why Choose the Botanicare Low Tide Tray 1×4
The following points are grounded in the official Botanicare product page, supplier listing data, and confirmed third-party retailer information. Each addresses a specific reason a grower might select this tray over alternatives in a narrow form factor.
- Narrow 1×4 form factor fits where square trays cannot. At 48 inches long and 14.25 inches wide, the Low Tide 1×4 occupies a footprint that standard square grow trays simply cannot serve. It fits on standard chrome wire shelving (typically 14 inches deep on common shelving units), along the edge of a workbench, on a windowsill, or inside a narrow vertical rack tier. Growers who build multi-tier growing setups on standard industrial shelving can place one or two 1×4 trays per shelf level without any overhang. The elongated shape also works well for growers who want to run a line of plants along a wall or under a strip light where a square tray would extend too far into the room. This is the primary reason to choose the 1×4 over a larger Low Tide tray — it goes where nothing else fits.
- Diagonal drainage grid reduces standing water and salt buildup. The Low Tide tray uses a diagonal drainage grid molded into the tray floor that actively directs water toward the bulkhead recess. Nutrient solution and plain water runoff flows to the drain point rather than pooling across the tray surface. Standing water in a flat-bottomed tray evaporates and leaves behind mineral salt deposits that clog drain fittings and create conditions favorable to algae and pathogens. The diagonal grid keeps the tray draining consistently, reducing the frequency of deep cleaning and maintaining a cleaner root zone. In the narrow 1×4 shape, this grid is especially effective because water has a shorter lateral distance to travel to reach the drain point compared to a wider tray.
- Low-profile 3.5-inch sidewalls with trimmed edges for easy cleaning. The Low Tide uses 3.5-inch sidewalls — roughly half the height of standard Botanicare OD flood trays. The lower sidewalls make the tray easier to reach into for wiping surfaces, removing debris, and scrubbing the drainage grid between crop cycles. The trimmed edges eliminate sharp corners where organic material and mineral deposits accumulate in deeper trays, reducing the time and effort required for sanitization between crop rotations. At only 5 pounds, the 1×4 tray is light enough to lift with one hand, flip over a sink, and scrub the underside without assistance.
- Built from at least 80% recycled materials, BPA-free, and manufactured in the USA with solar energy. The tray is constructed from extra-thick, high-impact ABS plastic incorporating at least 80% recycled content. The BPA-free material matters for growers producing edible crops where nutrient solution contacts the tray surface and drains back into the reservoir. Botanicare manufactures the Low Tide line in the United States using renewable solar energy. The ABS plastic includes UV inhibitors that extend the tray’s service life in greenhouse environments where indirect sunlight reaches the tray surface.
- Lightweight at 5 pounds for easy handling and multi-tier setups. At 5 pounds empty, the 1×4 Low Tide tray is one of the lightest grow trays in the Botanicare lineup. This matters for growers who mount trays on elevated shelving, vertical rack systems, or wall-mounted brackets where every additional pound of dry weight adds load to the structure. It also simplifies teardown and cleaning — the tray can be pulled off a shelf, carried to a utility sink, scrubbed, and returned to position without requiring two people. In commercial propagation houses that use dozens of trays, the cumulative weight savings across an entire rack system is substantial.
Best Uses for the Botanicare Low Tide Tray 1×4
The use cases below are derived from the official Botanicare product description, third-party retailer listings, and the tray’s physical specifications. Each reflects a practical application where the 1×4 Low Tide’s narrow form factor and drainage grid provide a functional advantage over wider trays or individual saucers.
- Shelving-unit and vertical-rack growing systems. The 1×4 form factor is purpose-built for standard chrome wire shelving and vertical rack systems. A typical four-tier wire shelving unit with 48-inch-wide shelves that are 14 inches deep accommodates one Low Tide 1×4 tray per level with minimal overhang. Growers who stack four tiers can run 16 or more plants across four trays in a footprint that occupies less than 5 square feet of floor space. The narrow width keeps the plants within reach for watering, training, and harvesting without pulling the shelf away from the wall. Combined with a strip light mounted under each shelf above, this configuration creates an efficient vertical growing system for herbs, lettuce, microgreens, and small ornamentals.
- Windowsill and ledge gardens. At just over 14 inches wide, the Low Tide 1×4 fits on deep windowsills, window ledges, and narrow countertops that cannot accommodate a square tray. Growers who want a clean, contained surface for a line of potted herbs or small plants along a south-facing window can use the tray as both a containment surface and a drainage system. The diagonal drainage grid directs water to one end of the tray, preventing the pooling that occurs with flat saucers and protecting the sill surface from water damage. The black color absorbs ambient heat from sunlight, which can provide a mild warming effect on the root zone of plants sitting on the tray surface during cooler months.
- Propagation and clone rooting stations. The narrow profile makes the Low Tide 1×4 well-suited for propagation work on benches and shelves. Standard 10×20 propagation inserts (10 inches wide, 20 inches long) fit inside the tray’s 46.5-inch x 12.5-inch inside dimensions — two inserts placed end to end span 40 inches of the tray’s 46.5-inch length. Clone domes and humidity domes sit at a low height on the tray surface, and the 3.5-inch sidewalls do not block light from reaching the base of the cuttings. The drainage grid prevents complete water stagnation under the inserts, reducing the risk of damping off in rooting plugs.
- Drip system runoff collection on narrow benches. In drip-to-waste irrigation setups, nutrient solution is delivered to each plant via drip emitters, and the target runoff percentage is typically 10–20% of the volume delivered. The Low Tide 1×4 catches this runoff from a row of plants and channels it toward the drain point. Unlike individual saucers under each pot, a single 1×4 tray catches runoff from all plants on the tray surface simultaneously, which means one drain fitting instead of multiple saucers that need to be emptied by hand. If you are building a drip system and need inline filtration for your feed lines, a Dilution Solutions 1½ in filter with 200 mesh screen can help prevent emitter clogs that lead to uneven runoff distribution across the tray.
- Shallow ebb-and-flow systems for small plants. While the Low Tide tray is not designed for deep flooding like a standard 7-inch OD tray, its 3.5-inch sidewalls support shallow flood cycles suitable for seedlings, small herbs, clones, and low-profile growing media like rockwool cubes or net pots in a thin media bed. In a shallow ebb-and-flow configuration, a submersible pump in the reservoir below floods the tray to a 1–2 inch depth on a timed cycle, and the diagonal drainage grid ensures the solution drains back efficiently when the pump shuts off. The narrow 1×4 shape means the tray floods and drains faster than a wider tray of the same depth, reducing the pump run time needed per flood cycle.
- Microgreen and sprout production trays. The 1×4 footprint accommodates standard 10×20 microgreen trays placed end to end, making it suitable as a catchment tray under microgreen production flats. The diagonal drainage grid prevents water from pooling under the production flats, which reduces the risk of mold and bacterial growth on the underside of the growing medium. For growers who produce microgreens commercially on multi-tier rack systems, the 1×4 tray provides a contained drainage layer on each shelf level without requiring custom-fabricated drain pans.
Botanicare Low Tide Tray 1×4 vs Standard 1×4 Flood Trays
The most direct comparison is against standard-depth flood trays in the same 1 ft x 4 ft footprint, including offerings from Active Aqua and other manufacturers. Standard-depth 1×4 trays use 6–7 inch sidewalls (vs. the Low Tide’s 3.5 inches), hold 12–15 gallons (vs. 7.5), and weigh 8–12 lb (vs. 5.0 lb). The deeper sidewalls support full ebb-and-flow flooding to 4–6 inches for thick media beds, but add weight and cost.
Key trade-offs:
- Sidewall height and flood depth. The Low Tide’s 3.5-inch sidewalls limit flooding to approximately 3 inches of depth — sufficient for shallow flood cycles over rockwool cubes, small net pots, and propagation media, but not deep enough for a thick expanded clay bed requiring 5–6 inches. Standard flood trays with 7-inch sidewalls support the full range of flood-and-drain media depths. If your system requires deep flooding, the standard-depth tray is the correct choice; for drip-to-waste, hand watering, or shallow flood cycles, the Low Tide provides the same narrow footprint with less bulk and weight.
- Weight and handling. At 5.0 lb, the Low Tide 1×4 is significantly lighter than standard-depth flood trays in the same footprint, which typically weigh 8–12 lb depending on manufacturer and material thickness. The weight difference matters substantially in multi-tier rack systems where each shelf supports one or more trays plus the weight of plants, media, and water. A lighter dry-weight tray reduces the structural load on shelving units that may already be near their rated capacity. It is also easier to remove, clean, and replace during crop changeovers.
- Volume capacity and solution use. The Low Tide holds 7.5 gallons at full capacity versus 12–15 gallons for a standard-depth 1×4 tray. In ebb-and-flow operation, this means each flood cycle uses less nutrient solution, which reduces solution cost and waste in systems where the flooded solution is not fully recaptured. For drip-to-waste catchment, the 7.5-gallon capacity is more than adequate for typical runoff volumes from a row of plants on a 1×4 footprint. With three to five plants producing 50–100 mL of runoff each per feeding, total runoff per watering session is well under 1 gallon.
- Cleaning and maintenance. The Low Tide’s trimmed edges and lower sidewalls make the interior surfaces easier to access for wiping, scrubbing, and sanitizing. Standard-depth trays with 7-inch sidewalls create deeper corners where debris and mineral deposits accumulate and are harder to reach. The diagonal drainage grid on the Low Tide also reduces the amount of standing water that remains in the tray after draining, which limits the mineral residue left behind after evaporation. At 5 pounds, the tray is light enough to carry to a sink for thorough cleaning rather than scrubbing it in place on the shelf.
- Price and material efficiency. Low Tide trays are positioned as the budget-friendly option within the Botanicare tray lineup. The lower material volume required for shorter sidewalls translates to a lower price point for the same footprint coverage. Growers who do not need deep-flood capability can save money by choosing the Low Tide over a standard-depth tray without sacrificing the build quality, drainage design, or recycled-material construction that Botanicare trays are known for.
Compatibility & Operating Range
The compatibility information below is drawn from the official Botanicare product page, supplier data, and established practice for ABS grow trays in hydroponic and container gardening environments. All dimensions and clearances are specific to the 1 ft x 4 ft size.
- Chrome wire shelving and vertical racks. The 14.25-inch width fits on standard chrome wire shelving units with 14-inch or deeper shelves. Common shelving units from brands like Metro, Husky, and generic industrial suppliers typically offer shelves in 14-inch, 18-inch, and 24-inch depths. The 1×4 tray fits flush on 14-inch shelves and has clearance on 18-inch and 24-inch shelves. For 14-inch shelves, measure the actual shelf depth between the front and rear wire crossbars to confirm at least 14.25 inches of usable space. On 48-inch-wide shelving, one tray spans the full width; on 72-inch-wide shelving, one tray plus a 24-inch-wide secondary tray can sit side by side. Verify that each shelf tier is rated for the combined weight of the tray (5 lb), growing containers, media, plants, and retained water (up to 7.5 gallons or approximately 62 lb when fully loaded with water).
- Drain fitting compatibility. The Low Tide tray includes a bulkhead recess for a drain fitting. Standard Botanicare trays typically accept ¾-inch drain fittings, though the exact fitting size for the Low Tide line should be verified against the bulkhead recess diameter before installation. A ¾-inch bulkhead fitting with a barbed outlet is the most common configuration, connecting to standard ¾-inch ID vinyl tubing that runs to a waste container or reservoir below. On multi-tier shelving, route the drain tubing down the shelving frame to a shared waste container at the base.
- Botanicare Irrigation Line Locks and Header Locks. The tray is compatible with Botanicare’s Irrigation Line Locks and Header Locks, which are clip-on fittings that secure drip irrigation lines to the tray sidewall edges. These locks prevent tubing from shifting during watering cycles and keep the tray interior organized. On the narrow 1×4 tray, Line Locks are especially useful for securing the main feed line along one long edge while emitter lines branch off to each plant position.
- Botanicare Track Bench System. The Low Tide 1×4 is compatible with Botanicare’s Track Bench System, an aluminum rail framework that supports trays at an elevated working height. Multiple 1×4 trays can be placed side by side on the bench rails to create a wider growing surface while maintaining independent drainage for each tray. Verify that the bench rail spacing accommodates the 14.25-inch tray width before ordering bench components.
- Temperature range. ABS plastic is rated for continuous use across the temperature range found in typical indoor grow environments (55–95°F / 13–35°C). The UV inhibitors in the Botanicare Low Tide tray provide additional protection against degradation in greenhouse environments where the tray may receive indirect sunlight. However, ABS can become brittle over extended exposure to direct UV radiation; in greenhouse applications with direct sun exposure, position the tray under the plant canopy or on a shaded shelf to limit direct UV contact.
- Nutrient solution compatibility. ABS plastic is chemically resistant to the pH range used in hydroponic nutrient solutions (pH 5.0–7.0) and is not degraded by standard hydroponic nutrients, pH adjusters, or hydrogen peroxide-based sanitizers at typical use concentrations. The BPA-free construction ensures no BPA leaching into nutrient solution that contacts the tray surface, which is relevant for edible crop production. Avoid exposing the tray to concentrated solvents, acetone, or strong acids, which can damage ABS plastic.
- Water quality management. For growers who want precise control over the water entering their system, pairing the tray with a quality water filtration setup ensures clean input from the start. The Hydro-Logic Micro-75 reverse osmosis system provides 75 GPD of purified water that starts with near-zero dissolved solids, giving you full control over nutrient concentration and reducing mineral buildup in the tray over time.
Usage Guidelines for the Botanicare Low Tide Tray 1×4
The following guidelines cover practical operation of the Botanicare Low Tide Tray 1×4 across its primary use cases. Information is drawn from the official product description, confirmed specifications, and standard practice for grow tray operation in indoor environments.
Container layout and spacing. The 46.5-inch x 12.5-inch inside dimension supports a single row of containers. Common layouts for this tray include: four to five 4-inch pots spaced approximately 10–12 inches apart along the tray length; three 1-gallon containers spaced approximately 15 inches apart; or two 3-gallon containers spaced approximately 22 inches apart. The narrow 12.5-inch inside width generally limits container placement to a single row rather than a grid. Leave at least 1 inch of clearance between containers and the tray sidewalls so the drainage grid remains partially exposed for water flow along the tray edges.
Propagation insert layout. Two standard 10×20 propagation inserts placed end to end span 40 inches of the tray’s 46.5-inch length, leaving approximately 6.5 inches of exposed tray at one end for the drain fitting. The 10-inch width of the inserts fits within the 12.5-inch inside width with about 1.25 inches of clearance on each side. This is a practical configuration for rooting clones, starting seeds, or growing microgreens on a narrow shelf. A single 10×20 insert centered in the tray leaves room for a small reservoir cup or humidity dome at the opposite end.
Drain fitting installation. If your tray does not come with a pre-installed drain fitting, install a bulkhead fitting in the recess at the low point of the diagonal drainage grid. Apply a rubber gasket on both sides of the tray floor where the fitting threads through to create a watertight seal. Tighten by hand plus a quarter turn with pliers — over-tightening ABS plastic can crack the bulkhead recess. Connect ¾-inch ID vinyl tubing to the barbed outlet and route it to a waste container, floor drain, or return reservoir below the tray.
Drip-to-waste operation. Set drip emitters to deliver nutrient solution at a rate that produces 10–20% runoff by volume. For example, if each of four plants receives 500 mL of solution, expect 50–100 mL of runoff per plant, totaling 200–400 mL (0.05–0.11 gallons) per feeding. This is well within the tray’s 7.5-gallon capacity. Monitor the drain fitting outlet during the first few feedings to confirm that runoff flows cleanly to the waste container and does not back up in the tray. If runoff pools on one side, check that the tray is sitting level and that the drainage grid channels are not obstructed by debris or root material.
Shallow flood-and-drain operation. For ebb-and-flow use, install the drain fitting as described above and connect the tray to a reservoir positioned below the tray level. Use a submersible pump in the reservoir to flood the tray on a timer. Flood depth should not exceed 2–3 inches given the 3.5-inch sidewall height — leave at least half an inch of freeboard to prevent overflow from wave action or pump surge. The narrow 1×4 shape floods quickly due to the small volume required to fill the tray to a given depth: approximately 1.5–2 gallons to reach a 2-inch flood depth. A typical flood cycle runs the pump for 3–10 minutes depending on pump flow rate, then allows the tray to drain back to the reservoir for 30–60 minutes before the next cycle.
Cleaning between crop cycles. Remove all containers, debris, and root material from the tray. Rinse with plain water, then apply white vinegar diluted 1:4 (or a commercial mineral deposit remover rated for ABS plastic) and let it sit for 15–30 minutes. Scrub the drainage grid channels with a soft-bristle brush, rinse thoroughly, and air-dry. At 5 pounds, the tray is easy to carry to a utility sink for thorough cleaning.
Sanitization for pathogen control. Between crop cycles, sanitize the tray after cleaning to reduce the risk of carrying root pathogens (Pythium, Fusarium) to the next crop. Apply 3% hydrogen peroxide undiluted to all surfaces and let it sit for 10 minutes, then rinse with clean water. Alternatively, use a quaternary ammonium sanitizer at the manufacturer’s recommended dilution. Avoid bleach above 10% concentration, which can degrade ABS plastic over repeated applications.
How to Set Up the Botanicare Low Tide Tray on a Shelving Unit
The steps below describe setting up the Botanicare Low Tide Tray 1×4 on a standard chrome wire shelving unit for a drip-to-waste or hand-watered container garden. The same tray setup applies to workbenches, windowsills, and other narrow surfaces with minor adjustments noted in each step.
- Verify shelf dimensions and weight capacity. Measure the shelf depth to confirm at least 14.25 inches of usable space between the front and rear crossbars. Check the shelf tier’s weight rating against the expected load: 5 lb (tray) plus containers, media, plants, and up to 62 lb of water at full capacity. For windowsills and ledges, confirm the surface can support the loaded weight and that the 48-inch length fits.
- Place a rigid liner on wire shelving. Chrome wire shelving has gaps that can cause the tray to sit unevenly. Place a rigid liner (acrylic sheet, plywood, or commercial shelf liner) on top of the shelf to create a flat support surface. This step is not necessary for solid surfaces like workbenches or windowsills.
- Position the tray and install drain fitting. Place the tray on the shelf and align the bulkhead recess with the side where you plan to route the drain line. For drip-to-waste or ebb-and-flow setups, install a bulkhead fitting in the drain recess with rubber gaskets on both sides and tighten hand-tight plus a quarter turn. Connect vinyl tubing to the barbed outlet and route it to a waste container below. Secure tubing to the shelving frame with cable ties.
- Level the tray. Place a bubble level on the tray surface and check both axes. The tray should slope slightly toward the drain recess. If needed, shim the opposite end with thin rigid material until the drainage grid directs water toward the drain point. On a 48-inch tray, a ⅛-inch shim at the far end creates sufficient slope.
- Arrange containers on the tray. Place growing containers in a single row along the tray’s length. Keep containers at least 1 inch from sidewalls so drainage grid channels remain unobstructed. If using fabric pots, ensure bases sit flat on the grid surface to avoid blocking drainage channels.
- Connect irrigation lines (drip systems). Route drip tubing from your reservoir pump along the shelving frame to the tray. Secure the main feed line along one long edge using Botanicare Irrigation Line Locks if available. Branch emitter lines to each plant position. For hand-watering setups, skip this step.
- Test drainage and begin growing. Pour 1 gallon of plain water onto the tray and verify it flows toward the bulkhead recess and exits through the drain fitting. Check for leaks at the gaskets. Once confirmed, place planted containers on the tray and begin your irrigation schedule. Monitor the first several watering cycles to verify runoff drains cleanly.
Sources & Further Reading
- Botanicare Low Tide Trays — Official product page (botanicare.com) — confirmed diagonal drainage grid, 3.5-inch sidewalls, 80% recycled materials, BPA-free construction, and made in USA with solar energy. Source for all primary specifications and feature claims on this page.
- Botanicare — Brand homepage (botanicare.com) — brand mission, tagline (“We help growers grow better crops”), engineering-focused positioning, and product line context for the Low Tide series within the broader Botanicare tray catalog.




















Reviews
There are no reviews yet.