Can-Fan Max-Fan Pro Series – 10 in – 1057 CFM

The Can-Fan Max-Fan Pro Series 10 in – 1057 CFM is a high-performance inline fan designed for grow room ventilation and climate management. Built with fiberglass reinforced plastic housing and certified to UL and CSA standards, it delivers 1057 CFM at 10 inches with three selectable control speeds and quieter operation than the original Max-Fan design. The included EZ Mount bracket simplifies installation in ducted air systems.

Can-Fan Max-Fan Pro Series Specifications

Core specifications for the Max-Fan Pro Series 10-inch inline fan. The fan connects to standard 10-inch ducting and is rated for continuous duty ventilation in indoor grow environments.

Why Choose the Can-Fan Max-Fan Pro Series

The Max-Fan Pro Series builds on the proven Max-Fan platform with specific engineering improvements that matter in real grow room conditions. Here is what distinguishes it from the original model and from generic inline fans in this airflow class:

• More efficient and stronger than the original Max-Fan: The Pro Series redesign improves both motor efficiency and structural rigidity compared to the earlier Max-Fan line, delivering more reliable performance over long duty cycles.
• Robust fiberglass reinforced plastic housing: The housing compound is tougher and more resistant to moisture, heat, and the humid conditions typical in enclosed grow rooms, compared to standard ABS or polypropylene fan bodies.
• UL and CSA certified: The fan meets both United States (UL) and Canadian (CSA) safety requirements. This matters for commercial growers and for installations that need to pass electrical inspection.
• Three selectable control speeds: Low, medium, and high speed settings allow growers to tune airflow to actual room conditions rather than running at maximum output continuously. This reduces noise and saves energy during lower-demand periods.
• Quieter operation: The Pro Series runs at lower noise levels than the original Max-Fan at comparable speeds — relevant for facilities where noise is a concern or where fans run continuously overnight.
• EZ Mount bracket included: The bracket ships with the fan and is designed to speed up installation in ducted systems without requiring fabricated mounting hardware.

Best Uses for the Can-Fan Max-Fan Pro Series 10 in

At 1057 CFM through a 10-inch duct, the Max-Fan Pro Series is sized for medium to large grow rooms and commercial tent configurations. The following applications reflect its capacity and design:

• Primary exhaust for large grow tents and rooms: A 1057 CFM fan can turn over the air in a substantial enclosed space quickly enough to manage heat and CO2 buildup. It suits tents in the 10×10 to 10×20 footprint range depending on heat load and ducting length.
• Inline scrubber systems: The fan pairs with a carbon filter — such as those using a 4-inch pre-filter sleeve — in a pull-through or push-through configuration for odor control. When pairing with a carbon filter, use a filter rated for at least 1057 CFM to avoid starving the fan. A pre-filter can help extend the carbon filter’s service life in dusty environments.
• Multi-room ducted systems: The three-speed control makes the fan adaptable to branched ducting setups where flow needs to be balanced across multiple spaces.
• HVAC supplemental exhaust: In sealed or climate-controlled rooms using CO2 supplementation, the fan handles venting during purge cycles without over-exhausting the space at lower speed settings.
• Commercial propagation and veg rooms: The UL/CSA listing and robust housing make this fan suitable for professional installations where equipment must meet code requirements.

Compatibility

The Max-Fan Pro Series 10-inch model connects to standard 10-inch flexible or rigid ducting. The following compatibility notes are based on the product’s design and certifications as described in the canonical data:

• Ducting: Fits standard 10-inch diameter flexible aluminum ducting and rigid metal duct. Clamp or tape connections securely to prevent air bypass.
• Carbon filters: Compatible with any 10-inch carbon filter rated at or above the fan’s CFM output. Matching the filter’s CFM to the fan prevents static pressure buildup that reduces effective airflow.
• Speed controllers: The built-in three-speed switch handles speed reduction without an external controller. If you need variable (dial-type) speed control, verify controller compatibility with the fan’s motor type before purchase.
• Safety standards: Listed to UL and CSA requirements, making it compatible with installations requiring certified components in both the United States and Canada.
• Mounting: The included EZ Mount bracket is designed for standard overhead or wall-mount installation in ducted systems. For supplemental circulation in the grow space itself, pairing with a pedestal fan — such as an Active Air HD pedestal fan — can improve canopy-level airflow without increasing exhaust load.

Sources & Further Reading