The EcoPlus Eco Air 8 is an oil-free piston air pump with eight independent outlets and a 380 GPH flow rate, drawing only 13 watts. It is designed for hydroponic reservoirs, deep water culture systems, and any application requiring reliable, distributed oxygenation across multiple sites. Cylinders and pistons are built from premium materials for long-term durability, and the pump pairs with standard air dividers supporting 4 to 22 outlets. Sold in cases of 8.
EcoPlus Eco Air 8 Specifications
All figures below are sourced from the product’s canonical data. Dimensional measurements are in inches; weight in pounds.
| Specification | Value |
|---|---|
| Brand | EcoPlus |
| Model | Eco Air 8 |
| Number of Outlets | 8 |
| Power Draw | 13 Watts |
| Flow Rate | 380 GPH |
| Operation Type | Oil-free piston |
| Dimensions (L × W × H) | 7.5 × 10.7 × 5.9 in |
| Weight | 5.9 lb |
| Air Divider Compatibility | 4–22 outlets |
| Supplier SKU | HGC728350 |
| Case Quantity | 8 units per case |
Why Choose the EcoPlus Eco Air 8
The Eco Air 8 addresses a common challenge in multi-site hydroponic setups: delivering consistent, oil-free airflow to eight separate points without a complicated manifold arrangement. Here is what makes it a practical choice.
- Eight independent outlets built in. No external manifold is required to split airflow to eight sites. Each port draws directly from the pump, reducing pressure drop and the number of fittings that can leak or clog.
- Oil-free piston design. The pump runs without lubricating oil, which eliminates the risk of oil contaminating the nutrient reservoir if a diaphragm or seal fails. This matters in recirculating systems where contamination affects plant health and calibration readings.
- Premium cylinders and pistons. According to the manufacturer, the cylinders and pistons are constructed from premium-grade materials, contributing to a longer service life under the continuous-duty cycles typical in indoor grows.
- Compatible with air dividers from 4 to 22 outlets. If your layout changes — additional reservoirs, additional DWC buckets — you can attach a standard air divider and expand the distribution network without replacing the pump.
- Efficient power consumption. At 13 watts for 380 GPH, the Eco Air 8 delivers a high volume of airflow relative to its power draw, which matters when the pump runs continuously around the clock.
Best Uses for the EcoPlus Eco Air 8
This pump is suited to operations that need reliable, distributed oxygenation across multiple reservoirs or grow sites simultaneously. The following are the most practical applications based on the product’s specifications and category.
- Deep water culture (DWC) systems. DWC growing relies on continuous oxygenation of the nutrient solution. With eight outlets, a single Eco Air 8 can service eight individual buckets or a corresponding number of air stones in a larger reservoir.
- Multi-site recirculating hydroponic setups. NFT channels, ebb-and-flow systems, and recirculating drip systems all benefit from supplemental aeration in their reservoirs. Eight outlets allow one pump to supply an entire grow room’s reservoir network.
- Aquaponic and fish-holding tanks. The oil-free design is appropriate in systems where aquatic life is present and contamination from lubricants would be harmful.
- Commercial and wholesale grows. Sold in cases of 8, the Eco Air 8 is structured for growers purchasing at volume — commercial facilities, wholesale accounts, or operators stocking backup units.
- Propagation chambers and clone banks. Consistent oxygenation at low volumes per outlet makes this pump usable for aeroponic or water-culture propagation setups where gentle, even airflow across multiple sites is required.
Compatibility & Operating Range
The Eco Air 8 uses standard barbed outlet ports compatible with common aquatic and hydroponic tubing sizes. The pump’s output can be distributed further using any air divider designed for 4 to 22 outlets, which covers the full range of manifold configurations encountered in typical indoor growing environments.
Because the pump is oil-free, it is safe to use in proximity to nutrient reservoirs and in enclosed grow tent environments where aeration of the solution is a continuous requirement. The pump runs on standard AC power; no special voltage conversion is needed for North American electrical systems.
For growers running multiple air pumps across a single room, pairing the Eco Air 8 with a dedicated controller or timer allows oxygenation cycles to be coordinated with other environmental equipment. If you are also managing a smaller reservoir or a secondary grow area, the Active Aqua multi-outlet air pump is a comparable option to consider for lower-flow applications within the same water management category.
When selecting tubing, use ID-matched airline tubing that seats fully on the barbed outlets to prevent air loss. Air stones at the end of each run should be sized appropriately for the reservoir volume they are aerating; a pump delivering 380 GPH total across eight outlets provides approximately 47.5 GPH per outlet under equal-load conditions.
Sources & Further Reading
EcoPlus does not maintain a public brand website. Product specifications and features have been compiled from manufacturer documentation and authorized distributor catalogs.












Reviews
There are no reviews yet.