EcoPlus Elite Series Jet Pump – 3/4 hp

The EcoPlus Elite Series Jet Pump (3/4 hp) is a self-priming, single-impeller pump designed for domestic water supply, garden irrigation, and hydroponic systems that demand consistent high flow and high pressure. It connects via standard 1″ NPT fittings, ships with a built-in pre-filter, and includes a 5 ft power cord for straightforward installation.

EcoPlus Elite Series Jet Pump 3/4 hp Specifications

All specifications are drawn directly from the manufacturer product data and canonical row attributes.

Why Choose the EcoPlus Elite Series Jet Pump 3/4 hp

Jet pumps designed for irrigation and horticultural use need to maintain adequate pressure across a run of drip lines, emitters, and fittings. This model is built around that requirement. Here is what the canonical product data supports:

• Single-impeller high-pressure delivery. The pump uses one impeller sized to generate the pressure head drip emitters and similar irrigation equipment require to operate correctly. Insufficient PSI is a common reason drip systems fail to distribute water evenly; this pump is specified to address that.
• Self-priming design. The pump can reprime itself after losing its water column, which matters in irrigation setups where the supply line may run dry between cycles. You do not need to manually prime it each time the system restarts.
• Built-in pre-filter. A pre-filter is integrated into the pump body. This reduces the frequency of clogs caused by fine particulates in irrigation water before they reach the impeller, extending service intervals.
• Standard 1-inch NPT fittings. Both the inlet and outlet use 1 in NPT threads, which is the most common connection size in irrigation and hydroponic plumbing. Standard off-the-shelf fittings connect without adapters in most installations.
• Compact and robust construction. The Elite Series housing is described as compact and robust. At 26.6 lb, the pump is substantial enough for fixed installations while still being manageable for a single person to position and mount.

Best Uses for the EcoPlus Elite Series Jet Pump 3/4 hp

This pump suits applications where a consistent pressure head and reliable self-priming behavior are more important than ultra-low flow rates. The following use cases are drawn from the manufacturer description:

• Drip irrigation systems. Drip emitters and micro-irrigation equipment typically require a minimum operating pressure to open and distribute water uniformly. A 3/4 hp jet pump provides the pressure head needed to run larger drip manifolds across a greenhouse or outdoor grow area.
• Garden and nursery water supply. The pump is listed for general gardening applications — moving water from a storage tank or well to a distribution point in a garden or nursery environment.
• Domestic water supply (small-scale). The manufacturer describes domestic water supply as an appropriate application, covering situations such as pressurizing water from a holding tank to service points in a structure or outbuilding.
• High-PSI irrigation equipment. Any irrigation component that specifies a minimum inlet pressure — including certain spray heads, zone valves, and fertilizer injectors — benefits from a pump that can reliably maintain that pressure under load.
• Hydroponic recirculating systems. In larger hydroponic setups, particularly those using top-feed drip or flood-and-drain at scale, a dedicated pump with the pressure output of a 3/4 hp jet pump gives more consistent delivery than a standard submersible. For setups that also use compressed air, an Active Aqua multi-outlet air pump covers aeration needs separately. If your source water requires treatment first, consider pairing with a Hydro-Logic Micro RO system upstream of the pump.

Compatibility

The pump uses 1 in NPT threaded connections on both the inlet and outlet. This is a widely used standard in irrigation and fluid-handling plumbing; compatible fittings, valves, and pipe adapters are available at irrigation supply and hardware stores. The built-in pre-filter protects the impeller from coarse particulate, but water with heavy sediment or debris loads may warrant an additional inline filter upstream — the Dilution Solutions 1-1/2 in filter with 200-mesh screen is one option for inline pre-filtration where the supply is known to carry fine solids.

The 5 ft power cord is suitable for most fixed-installation scenarios where an outlet or disconnect is located within reach of the pump mounting position. For installations requiring a longer reach, use a properly rated extension cord or have the circuit extended by a licensed electrician. The pump is described as a self-priming centrifugal jet pump; confirm that your installation provides a water source at or near the pump elevation, as jet pumps lift water from a static depth limited by the pump’s specifications. No electrical compatibility data beyond the power cord length is present in the canonical row; consult the manufacturer documentation for voltage and amperage requirements before wiring.

Sources & Further Reading