EZ-CLONE Low Pro 128 System White

The EZ-CLONE Low Pro 128 System (White) is a true aeroponic cloning system designed to root 128 cuttings at once. Plant stems are suspended in air and continuously misted with an oxygen-rich nutrient solution, eliminating the need for a humidity dome and reducing the risk of fungal issues common in traditional propagation trays. Built in the USA from UV-protected HDPE plastic, it ships complete and ready to run.

EZ-CLONE Low Pro 128 System Specifications

Key specifications for the EZ-CLONE Low Pro 128 System White, drawn from manufacturer documentation included with the unit.

Specification	Value
System Type	True aeroponic cloning system
Cloning Sites	128 sites
Water Pump	750 GPH submersible pump (included)
Misting	360° misters via custom-size EZ-CLONE manifold
Reservoir Material	UV-protected HDPE plastic (extended flange, drainage gutters)
Lid Style	Alphanumeric site-labelled lid with 4-way finger extraction slots
Clone Collars Included	4 packages (Green, Grey, Purple, White)
Humidity Dome Required	No — aeroponic misting keeps cuttings hydrated without a dome
Color	White
Origin	Designed and manufactured in the USA
Supplier SKU	674128WT

Why Choose the EZ-CLONE Low Pro 128 System

The Low Pro 128 addresses the practical limitations growers run into with conventional propagation methods. Here is what distinguishes this system from tray-and-dome setups:

• No humidity dome needed. The continuous aeroponic mist keeps stem bases hydrated at all times, so cuttings can breathe and transpire freely. This significantly reduces the conditions that favor powdery mildew and other airborne fungi.
• Patented aeroponic delivery. The EZ-CLONE manifold feeds 360° misters that coat root zones evenly, delivering an oxygen-rich solution directly to developing roots rather than submerging them in standing water.
• Alphanumeric site labelling. Each of the 128 sites on the lid carries a unique alphanumeric identifier, making it straightforward to track multiple strains or genetic lines running simultaneously without mixing up cuttings.
• 4-way finger slots. The collar extraction slots are designed to remove clone collars cleanly without disturbing adjacent sites or damaging delicate new root tips.
• Leak-proof reservoir design. The increased lip height and extended flange with drainage gutters prevent solution from running along the power cord — a common failure point on lower-quality systems.
• UV-protected HDPE construction. The reservoir and lid are manufactured from UV-stabilized HDPE, which resists degradation under grow-room lighting and remains food-safe for repeated cleaning cycles.
• Complete kit. The system includes the pump, manifold, misters, four collar colour packs, sample Clear Rez solution, sample Rooting Compound, product guide, and warranty — no additional purchases required to run your first batch.

EZ-CLONE systems are designed and assembled in the USA, and this model ships with a product warranty backed by EZ-CLONE.

Best Uses for the EZ-CLONE Low Pro 128 System

The 128-site capacity and aeroponic delivery make this system well-suited to specific propagation scenarios:

• High-volume commercial propagation rooms. When you need to push 128 uniform clones through propagation on a consistent cycle, the Low Pro 128 handles a full commercial tray equivalent in a single reservoir. The alphanumeric lid lets you run multiple strains without a separate tracking spreadsheet.
• Multi-strain breeding and selection programs. Growers evaluating multiple phenotypes can assign colour-coded collars (green, grey, purple, white) per genetic line, keeping selection records tied directly to physical site positions.
• Environments where humidity management is a concern. Because no dome is required, the Low Pro 128 is practical in rooms with limited humidity-control capacity. Eliminating the dome removes a common reservoir for stagnant, humid air that promotes fungal outbreaks.
• Facilities transitioning from soil or rockwool propagation. The system ships with sample Clear Rez solution and Rooting Compound, allowing growers to complete an initial run and evaluate rooting speed before committing to full-size nutrient orders.
• Operations with limited vertical clearance. The Low Pro profile keeps the reservoir height minimal, which matters in rooms with fixed rack-to-rack heights or where propagation sits beneath a vegetative bench.

For operations running smaller batch sizes alongside this unit, the Active Aqua air pump with 1–8 outlets can support supplemental aeration for holding reservoirs or companion DWC setups in the same propagation room.

Compatibility

The EZ-CLONE Low Pro 128 System is self-contained and does not require additional grow media beyond the included clone collars. However, several common integration points are worth noting:

• Clone collars. The system ships with four colour packs of EZ-CLONE Clone Collars sized for the 128-site lid. Replacement EZ-CLONE Clone Collars in the same diameter are the correct refill choice; third-party collars of a compatible outer diameter may also fit, but EZ-CLONE collars are designed specifically for the slot tolerances on this lid.
• Nutrient solution. The reservoir is compatible with standard hydroponic nutrient formulations. The system includes a sample of EZ-CLONE Clear Rez Solution (a root-zone clarifier/antimicrobial) and EZ-CLONE Rooting Compound. Both can be repurchased separately for subsequent runs.
• Water source. For best rooting results, growers using tap water with elevated mineral content often run the solution through a pre-filter or RO unit before filling the reservoir. The HydroLogic Micro 75 GPD RO system is a practical option for small-to-medium propagation rooms that need consistent source-water quality.
• Electrical. The included 750 GPH pump is a standard submersible unit designed for standard 120V household outlets. No dedicated circuit is required for the pump alone; verify outlet capacity if running multiple units on the same circuit.
• Monitoring. Tracking EC and pH of the reservoir solution is standard practice. The Apera GroStar EC calibration kit is a compatible calibration tool for maintaining accurate conductivity readings throughout the propagation cycle.

The Low Pro 128 does not require an external timer for basic operation — the pump runs continuously, keeping the manifold and misters active. Some growers add a cycle timer to the pump for interval misting, which reduces solution temperature rise in warm rooms. EZ-CLONE does not specify a required interval schedule in the supplied documentation; consult the included Product Information Guide for recommended operating parameters.

Usage Guidelines

The following steps summarize standard operating practice for an aeroponic cloning system of this type, consistent with the guidance in the EZ-CLONE Product Information Guide included with the unit. Refer to the printed guide for specific solution ratios.

1. Prepare the reservoir. Clean the reservoir and lid with a mild disinfectant and rinse thoroughly before first use and between each propagation cycle. The drainage gutters make draining and rinsing straightforward.
2. Fill with solution. Fill the reservoir to the appropriate level with properly pH-adjusted water (typically 5.5–6.2 for aeroponic cloning). Add EZ-CLONE Clear Rez at the recommended rate. Do not overfill — the reservoir is designed to keep the water level below the bottom of the lid so mist, not standing water, contacts the stem bases.
3. Prepare cuttings. Take clean cuttings with a sharp sterile blade. Apply EZ-CLONE Rooting Compound to the cut end per the instructions in the included guide. Insert each prepared cutting into a clone collar, then seat the collar into a numbered site on the lid.
4. Track site assignments. Use the alphanumeric site labels on the lid to record which strain or genetic selection occupies each position. The four collar colour packs allow visual grouping of strains without relying solely on the site numbers.
5. Run the pump. Connect the 750 GPH pump to a standard outlet and confirm solution is reaching all 360° misters. Verify there are no blocked nozzles and that the manifold fittings are seated correctly.
6. Monitor daily. Check solution level, pH, and clarity daily. Top up with pH-adjusted water as the solution level drops. Replace solution completely if it becomes discoloured or develops odour. The EZ-CLONE Clear Rez solution helps maintain clarity between full changes.
7. Harvest cuttings. When roots are sufficiently developed (typically visible from the underside of the lid or through the site holes), use the 4-way finger slots to extract each collar cleanly and transfer rooted cuttings to the grow medium of choice.

Rooting time varies by species, cutting maturity, ambient temperature, and solution management. EZ-CLONE does not publish a universal target rooting schedule; the included Product Information Guide contains brand-specific guidance.

How to Set Up the EZ-CLONE Low Pro 128 System

Initial assembly is straightforward. All components ship in the box; no tools are required.

1. Inspect components. Unpack and verify you have the reservoir body, 128-site alphanumeric lid, custom EZ-CLONE manifold, 360° misters, 750 GPH water pump, four packs of clone collars (Green, Grey, Purple, White), sample Clear Rez Solution, sample Rooting Compound, Product Information Guide, and Warranty card.
2. Position the reservoir. Place the reservoir on a stable, level surface capable of supporting the weight of the filled system. Ensure the location has access to a standard 120V outlet and is within range of your water source for filling and draining.
3. Assemble the manifold. Connect the custom-size EZ-CLONE manifold inside the reservoir according to the layout diagram in the Product Information Guide. Thread the 360° misters onto the manifold ports; finger-tight is sufficient — do not over-torque the plastic fittings.
4. Connect the pump. Place the 750 GPH submersible pump in the reservoir and connect its outlet to the manifold inlet. Route the power cord through the reservoir’s cord-exit channel, using the leak-proof cord design (the extended flange and drainage gutters direct any condensation away from the cord path).
5. Seat the lid. Lower the 128-site lid onto the reservoir rim and verify it seats flush with no gaps. The increased lip height on the reservoir is designed to create a secure fit that prevents solution from splashing out during pump operation.
6. Fill and test before adding cuttings. Fill the reservoir with plain water to the correct level and plug in the pump. Confirm all 360° misters are spraying evenly and no manifold joints are leaking. Run for 10–15 minutes, then drain, and refill with your prepared nutrient and Clear Rez solution before introducing cuttings.
7. Begin propagation. Insert clone collars into the numbered sites, place prepared cuttings, and begin your propagation cycle per the Usage Guidelines above.

Sources & Further Reading