EZ-CLONE Low Pro 16 System White

The EZ-CLONE Low Pro 16 System in White is a 16-site aeroponic cloning system designed for growers who want consistent, reliable rooting without a humidity dome. Plant cuttings are suspended in air and misted continuously with an oxygen-rich solution, promoting fast root development. The system ships as a complete kit — reservoir, lid, misters, pump, collars, and starter chemistry — so setup requires no additional purchases.

EZ-CLONE Low Pro 16 System Specifications

Specifications are drawn from the manufacturer product description and included components list.

Specification	Value
System Type	True aeroponic cloning system
Number of Clone Sites	16 sites
Water Pump Flow Rate	450 GPH
Reservoir Material	Durable UV-protected HDPE plastic
Mister Type	360° misters via custom-size manifold
Lid Labeling	Alphanumeric (A–P or equivalent) for cutting identification
Collar Extraction	4-way finger slots for improved collar removal
Humidity Dome Required	No — system design eliminates dome requirement
Country of Manufacture	USA
Color	White
SKU	674016WT

Why Choose the EZ-CLONE Low Pro 16 System White

The EZ-CLONE Low Pro 16 is built around a patented aeroponic approach that keeps cuttings suspended in air rather than submerged in a growing medium. The roots receive a continuous oxygen-rich mist from 360° misters, which encourages faster root development compared to systems that rely on wet media or standing solution.

Because the cuttings never dry out between misting cycles, EZ-CLONE’s design eliminates the need for a humidity dome. This has two practical benefits: cuttings can transpire normally without being restricted inside a closed chamber, and the open airflow significantly reduces conditions that favor powdery mildew and other airborne fungi. Growers dealing with humidity-related pathogen pressure often find this meaningful.

The reservoir lid is labeled alphanumerically, so each cutting site has a fixed, readable identifier. This is useful when propagating multiple strains at the same time — you can track which cutting came from which mother plant without relying on tape labels that fall off in wet conditions. The 4-way finger slots built into the lid make pulling and reinserting clone collars straightforward, reducing handling time during inspections.

• Aeroponic misting without a humidity dome — cuttings breathe freely, reducing fungal risk during propagation
• 450 GPH water pump with custom manifold — consistent 360° misting across all 16 sites
• UV-protected HDPE construction — resists degradation under grow lighting over repeated use cycles
• Alphanumeric lid labeling — easy strain tracking when running multiple varieties simultaneously
• Complete kit with starter chemistry — includes sample sizes of EZ-CLONE Clear Rez Solution and Rooting Compound so the system is ready to run on first use
• Designed and manufactured in the USA

Best Uses for the EZ-CLONE Low Pro 16 System White

The 16-site capacity makes this system suited for small to mid-scale propagation runs where you need consistent results across a manageable number of cuttings at one time.

• Hobby and small-scale propagation — a 16-site unit is well-matched to home growers or small operations running regular cloning cycles from a limited number of mother plants
• Multi-strain tracking — the alphanumeric lid labeling is especially practical when rooting cuttings from several different strains in the same cycle; each site has a fixed, readable ID so records stay accurate through the entire rooting period
• Environments with humidity control concerns — because no humidity dome is needed, the system is a good fit for grow rooms where adding a closed dome would complicate airflow management or raise mold risk
• Hydroponic and coco coir production pipelines — rooted clones from an aeroponic propagation unit transition well into recirculating hydroponic systems that rely on well-oxygenated root zones
• Growers replacing tray-and-dome setups — the Low Pro format offers a lower-profile, self-contained alternative to foam block or rockwool propagation trays that require manual moisture management

Compatibility

The EZ-CLONE Low Pro 16 operates as a standalone recirculating aeroponic system. The included 450 GPH pump drives the manifold and 360° misters; no external pump or air pump is required for the cloning function itself.

EZ-CLONE clone collars are included and sized for the 16 lid sites. Replacement or additional collars should be EZ-CLONE-branded or confirmed to match the collar diameter of this specific lid to ensure a proper fit and prevent cuttings from dropping through.

The system uses standard 110V household current through the included pump — no special wiring or controller is required. It can be plugged into a basic outlet timer to run the pump on a cycle schedule if preferred, though the manufacturer documentation describes it as a run-to-run system that can operate continuously.

Rooted clones from the Low Pro 16 are compatible with the full range of hydroponic growing systems. Plants started in EZ-CLONE collars can be transferred directly to net pot-based systems, coco coir containers, or drain-to-waste setups. If you are running a larger water management or irrigation setup, pairing the propagation stage with a reverse osmosis water filtration system ensures the misting solution starts from purified water, which helps maintain stable EC and pH during the rooting phase.

Usage Guidelines

The EZ-CLONE system is designed for vegetative-stage cuttings taken from healthy mother plants. The following guidelines reflect the manufacturer’s design intent as described in the product documentation.

Solution preparation: The kit includes a sample of EZ-CLONE Clear Rez Solution and EZ-CLONE Rooting Compound. Mix these into the reservoir water according to the EZ-CLONE Product Information Guide included with the system. Starting with purified or filtered water helps maintain consistent EC and pH. A target pH range of 5.5–6.2 is typical for aeroponic cloning solutions, though the specific recommendation will be in the included guide.

Cutting preparation: Take cuttings from healthy vegetative growth. Trim lower leaves to reduce transpiration load and insert each cutting into a clone collar seated in the lid. The alphanumeric labeling on the lid allows you to record which cutting came from which mother plant — useful for multi-strain runs.

Running the system: Once cuttings are placed and the reservoir is filled to the appropriate level, start the pump. The 450 GPH pump drives solution through the custom manifold and out the 360° misters, delivering a continuous oxygen-rich mist to the base of each cutting. The manufacturer describes the system as requiring little maintenance during the rooting cycle. No humidity dome is needed.

Monitoring: Check the reservoir level regularly and top off with fresh solution as needed. Monitor for signs of algae or bacterial buildup; the included EZ-CLONE Clear Rez Solution is formulated to help maintain a clean reservoir. Inspect cutting bases periodically for root emergence, which typically occurs within one to two weeks depending on species, cutting size, and environmental temperature.

Harvesting rooted clones: Use the 4-way finger slots in the lid to extract collars without stressing the cutting or the roots. Once roots are visible and of sufficient length for your growing system, transfer immediately to prevent root zone desiccation.

How to Set Up the EZ-CLONE Low Pro 16 System

1. Unbox and inspect all components. Verify you have: 16-site lid, reservoir, clone collars (16), custom manifold, 360° misters, water pump (450 GPH), pump tubing/fittings, sample EZ-CLONE Clear Rez Solution, sample EZ-CLONE Rooting Compound, product information guide, and warranty card. Check for shipping damage before use.
2. Assemble the manifold and misters. Connect the custom manifold to the pump outlet per the included product information guide. Attach 360° misters to each manifold port. Ensure all connections are secure — the extended flange and drainage gutters on the reservoir are designed to contain any incidental drips at the lid seam.
3. Place the pump in the reservoir. The pump sits in the reservoir and drives solution up through the manifold. Route the cord through the leak-proof cord design channel in the reservoir lip so it exits cleanly without creating a drip path.
4. Seat the lid on the reservoir. Lower the 16-site lid onto the reservoir. The state-of-the-art reservoir design with increased lip height and extended flange creates a secure fit that minimizes leaks at the lid-reservoir junction.
5. Insert clone collars. Press EZ-CLONE clone collars into each of the 16 lid sites you intend to use. Sites not in use can be left open or covered with spare collars to reduce evaporation and light intrusion into the reservoir.
6. Prepare and fill the cloning solution. Mix EZ-CLONE Clear Rez Solution and Rooting Compound into clean or filtered water per the dosing instructions in the product guide. Fill the reservoir to the recommended level — high enough that the pump draws solution consistently, but not so high that solution contacts the bases of the collars before roots emerge.
7. Insert cuttings. Take cuttings from healthy vegetative mother plants, trim lower leaves, and seat each cutting in a collar. Note the alphanumeric site label for each cutting in your strain log.
8. Power on and verify misting. Plug the pump into a standard 110V outlet. Confirm that all misters are delivering a consistent mist to the underside of the lid and to the cutting bases. Uneven misting may indicate a blocked or improperly seated mister — clear or reseat as needed.
9. Monitor daily. Check reservoir level, solution clarity, and cutting condition each day. Top off solution as needed. Use the 4-way finger slots to inspect individual cuttings without disturbing others.

Sources & Further Reading