FloraFlex Quick Disconnect Pipe System Open Flow Bubbler Elbow – 1 in

The FloraFlex Quick Disconnect Pipe System Open Flow Bubbler Elbow – 1 in is an 8-outlet irrigation manifold designed for hydroponic drip and top-feed systems. It delivers water and nutrients to up to eight plants at your chosen pressure, and the entire assembly snaps together in seconds without glue or threading. This elbow configuration suits corner and inline routing in 1-inch pipe runs.

FloraFlex Quick Disconnect Pipe System Open Flow Bubbler Elbow – 1 in Specifications

All specification values are sourced from the canonical product listing and manufacturer documentation. No values have been estimated.

Specification	Value
Brand	FloraFlex
Pipe Size	1 in
Number of Outlets	8
Fitting Configuration	Elbow
Assembly Method	No glue or threading required
Included Components	Flora Pipe Fitting (Elbow 1 in), Flora Valve, Quick Disconnect, Open Flow Bubbler
Weight	0.5997 lb

Why Choose the FloraFlex Quick Disconnect Pipe System

The FloraFlex manifold system is designed for growers who need reliable, repeatable feed delivery across multiple plants without the complexity of glued PVC fittings or threaded connections. Here is what distinguishes this unit:

• Eight-outlet distribution: A single manifold feeds up to eight plant sites simultaneously, making it straightforward to maintain even irrigation across a row or block of plants in a single growing space.
• Pressure-selectable flow: The Open Flow Bubbler design lets you dial in the delivery pressure to match your reservoir head height and dripper requirements, giving consistent distribution across all eight outlets without needing separate pressure regulators on each line.
• Tool-free assembly and disassembly: No glue or threading is required at any connection point. The manifold goes together in seconds and comes apart just as quickly, which matters at harvest or when reconfiguring a room for a new crop cycle.
• Elbow configuration for corner routing: The 1-inch elbow fitting allows you to change pipe direction at corners or bends in the supply line without cutting and rejoining separate pipe sections.
• Compact and lightweight: At under 0.6 lb for the complete assembled unit, the manifold does not add meaningful weight to overhead or wall-mounted pipe runs.

Best Uses for the FloraFlex Quick Disconnect Pipe System Open Flow Bubbler Elbow

This manifold is well suited to the following grow configurations within the Drip and Irrigation Kits category:

• Hydroponic drip-to-waste systems: Connect one manifold to a supply line and feed eight coco or rockwool slabs or pots in a single row. The quick-disconnect fittings make it easy to reconfigure plant spacing between cycles.
• Recirculating drip setups: Use in conjunction with a multi-outlet air pump or reservoir system where nutrient solution is pumped to the manifold and excess drains back to the reservoir.
• Commercial and hobby scale grow rooms: Because assemblies snap together without glue, multiple manifolds can be added or removed as plant counts change, making this system practical for both large facilities and home growers scaling up incrementally.
• Inline corner routing in 1-inch pipe runs: The elbow profile routes the feed line around obstacles or walls without additional union fittings, keeping the pipe layout clean and reducing potential leak points.
• Top-feed applications over grow media: The Open Flow Bubbler outlets distribute water and nutrients evenly across the top of the media surface, helping prevent dry spots in containers or slabs.

Compatibility

The FloraFlex Quick Disconnect Pipe System is designed to work with 1-inch FloraFlex pipe fittings and the FloraFlex Quick Disconnect system. The elbow fitting in this unit accepts standard 1-inch Flora Pipe, and all connection points use the push-fit quick-disconnect mechanism shared across the FloraFlex manifold line.

The system is compatible with the full FloraFlex modular range, including T-fittings (available in 1 in and 3/4 in configurations) and the 3/4-inch elbow variant, allowing mixed pipe sizes to be integrated into the same irrigation network using FloraFlex transition fittings. If you are managing water quality upstream, pairing this with a 200-mesh inline filter helps protect the bubbler outlets from clogging.

This manifold is intended for use with clean or filtered nutrient solution. Do not use with unfiltered well water or water sources with significant particulate load, as debris can restrict the bubbler outlets over time. For water quality management upstream of the manifold, consider a reverse osmosis system such as the HydroLogic Micro 75 GPD RO system to remove dissolved solids before adding nutrients.

Sources & Further Reading