Hydro-Logic Evolution Wall Mount Bracket (96/PL)

The Hydro-Logic Evolution Wall Mount Bracket is a stainless steel mounting bracket designed specifically for the Evolution-RO 1000 reverse osmosis system. It allows you to secure the unit to any wall or flat surface, keeping your grow space organized and your RO system off the floor or countertop. The kit includes the bracket, mounting screws, and washers — everything needed for a clean, permanent installation.

Hydro-Logic Evolution Wall Mount Bracket Specifications

Physical dimensions and materials sourced from the manufacturer’s product data. All measurements are for the bracket assembly.

Specification	Value
Material	Stainless Steel
Length	12.312 in
Width	6.312 in
Height	5.625 in
Weight	1.51 lb
Compatibility	Hydro-Logic Evolution-RO 1000
Includes	Bracket, screws, and washers
SKU	HGC741585

Why Choose the Hydro-Logic Evolution Wall Mount Bracket

If you’re running a Hydro-Logic Evolution-RO 1000 system, keeping it mounted securely and out of the way makes a meaningful difference in day-to-day operation. Here’s what this bracket offers:

• Stainless steel construction: Stainless steel is the right material for a humid grow environment. It resists corrosion and won’t degrade from exposure to water or RO system condensation the way bare steel or plastic brackets can.
• Surface-agnostic mounting: The bracket attaches to any flat wall or vertical surface, giving you flexibility in how you lay out your filtration and irrigation setup. You’re not limited to a specific wall type or stud spacing.
• Complete hardware kit: The package includes the bracket, screws, and washers. You don’t need to source compatible fasteners separately — mount it with what’s in the box.
• Proper fit for the Evolution-RO 1000: This bracket is designed for the specific dimensions and weight of the Evolution-RO 1000 unit. Using a manufacturer-matched bracket reduces the risk of the unit shifting or coming loose under the weight of filled filter housings.
• Frees up floor and bench space: Wall-mounting the RO unit keeps reservoir areas, flood tables, and work surfaces clear. In a dense grow room, that floor space matters.

Best Uses for the Hydro-Logic Evolution Wall Mount Bracket

This bracket has a narrow, specific use case: permanently installing the Hydro-Logic Evolution-RO 1000 on a wall or vertical surface. That said, there are several grow-room configurations where it adds genuine value:

• Indoor grow rooms with limited floor space: Hydroponic setups often use every inch of floor space for grow containers, reservoirs, and irrigation infrastructure. Wall-mounting the RO unit keeps it accessible without occupying valuable growing area.
• Commercial or semi-commercial operations: Larger grows with dedicated water treatment zones benefit from a fixed, stable installation. The Evolution-RO 1000 handles high output, and the bracket keeps it securely positioned during continuous operation.
• Permanent facility installations: When you’re building out a long-term growing facility rather than a temporary or seasonal setup, wall-mounting your RO system is part of a clean, professional installation. It also makes plumbing connections more predictable and repeatable.
• Rooms with concrete or masonry walls: The bracket and included fasteners support mounting on hard surfaces common in basement or warehouse growing environments.
• Setups where the RO unit sits near a water source or drain: Wall-mounting places the unit at a consistent height, which can simplify feed and drain line routing compared to a unit sitting on the floor or on an unstable surface.

If you’re also planning your water treatment setup and need a compact RO option, the Hydro-Logic Micro 75 GPD Compact Portable Reverse Osmosis System is worth comparing for smaller operations that don’t require the full output of the Evolution-RO 1000.

Compatibility

This bracket is manufactured specifically for the Hydro-Logic Evolution-RO 1000 reverse osmosis system. It is not a universal RO bracket — the mounting points and dimensions are matched to the Evolution-RO 1000 chassis.

The bracket mounts to any flat, vertical surface capable of supporting the weight of the RO unit when filled. Concrete, wood stud, and masonry walls are all suitable surfaces, provided appropriate fasteners are used for the wall type. The included screws and washers are designed for the bracket attachment; you’ll want to use wall anchors or similar hardware suited to your specific wall material when anchoring to the surface itself.

The bracket does not require any electrical connections or plumbing modifications — it is a mechanical mounting accessory only. Your existing Evolution-RO 1000 feed, output, and drain lines remain unchanged after installation.

If you’re managing water quality for a larger system and need inline filtration upstream of your RO unit, the Dilution Solutions 1-1/2 in Filter with 200 Mesh Screen is a common addition to protect RO membranes from sediment.

How to Install the Wall Mount Bracket

Installation is straightforward. The kit ships with all hardware needed to attach the bracket to the unit and the bracket to your wall.

1. Choose your mounting location. Select a wall location that places the Evolution-RO 1000 within comfortable reach of your feed water supply line and drain. Leave enough clearance around the unit to access filter housings and the membrane housing for future maintenance.
2. Mark the mounting holes. Hold the bracket against the wall at the intended position and use a pencil or marker to mark the fastener locations. Use a level to confirm the bracket will sit plumb before drilling.
3. Prepare the wall surface. Drill pilot holes at the marked locations. If mounting into drywall without studs, insert appropriate wall anchors for the weight of a filled RO unit. If mounting into studs, concrete, or masonry, use fasteners suited to that substrate.
4. Secure the bracket to the wall. Use the included screws and washers to fasten the bracket to the wall. Tighten firmly but do not overtorque — stainless steel fasteners can strip if forced.
5. Mount the Evolution-RO 1000 onto the bracket. Follow the mounting points on the RO unit as designed for this bracket. Verify the unit is seated correctly and that it does not wobble or shift when light pressure is applied.
6. Reconnect supply and drain lines. Reattach your feed water line, product water output, and waste drain line. Check all fittings are hand-tight and leak-free before running water through the system.
7. Run a brief test cycle. Turn on the feed water supply and inspect all connections at the bracket, filter housings, and line connections for any drips or seepage.

Sources & Further Reading