Integra Boost Humidiccant 55% – 67 g (Pack of 100)

Integra Boost Humidiccant 55% RH (67 g, Pack of 100) is a bulk case of two-way humidity packs that hold a sealed container at 55% relative humidity. Each individually wrapped packet absorbs or releases moisture as ambient conditions shift and ships with a pink-to-blue indicator card so you know when to replace it. Built for harvest curing, long-term storage, and any sealed environment where stable, salt-free, non-toxic humidity control matters.

Integra Boost Humidiccant 55% Specifications

The 100-pack case is the bulk configuration of Integra Boost’s 67 g, 55% RH humidity packets. Each packet is individually overwrapped and ships with a single-use replacement indicator card. Specifications are drawn from the canonical supplier listing and the Integra Products brand site.

Why Choose Integra Boost Humidiccant 55%

The Integra Boost line is built around a salt-free formula that Integra Products positions as a cleaner alternative to salt-water humidity packs. For growers and processors curing or storing terpene-rich material at 55% RH, the brand’s argument is straightforward: the packet should manage moisture without putting any salt, glycerin residue, or other migration risk near the product.

• Two-way control at 55% RH — the packet absorbs excess moisture when ambient RH rises above the target and releases moisture when ambient RH falls below it, holding the sealed environment at or about 55%.
• Salt-free, non-toxic, biodegradable formula — per the Integra Products brand site, the humidiccant is formulated without salts and is safe for direct enclosure with stored product.
• Replacement indicator card included — each individually wrapped packet ships with a card whose round dot transitions from pink to blue when the packet is spent, removing the guesswork from replacement scheduling.
• Individually overwrapped packets — the case of 100 stores indefinitely until each packet is unwrapped, so a single bulk purchase can be drawn down over a long cure / storage cycle without losing capacity to ambient air.
• 67 g form factor — sized for medium-to-large sealed containers (vaults, totes, mylar bags, cure barrels) rather than single jars; one packet handles a much larger headspace than the 4 g or 8 g sizes.

Integra Products describes the line as the result of more than two decades of work in atmospherically controlled packaging, and the 55% RH level in particular is aimed at operators who prefer a drier cure profile, store in warmer ambient conditions, or are handling product where 62% is too wet for the intended shelf life.

Best Uses for Integra Boost Humidiccant 55%

The 67 g / 100-pack case is built for operators who go through humidity packs at volume. A few representative scenarios:

• Bulk harvest curing in totes, vaults, or barrels. Drop one or more 67 g packets into each sealed cure container after the initial dry-down. The packet pulls down residual moisture while the material equilibrates, reducing the need for manual burping and lowering the risk of mold during the first few weeks of cure.
• Long-term storage at 55% RH. Once cured, finished product stored in sealed mylar, glass, or rigid totes holds its weight, aroma, and texture longer when ambient RH inside the container is buffered. The 55% level is preferred where 62% would push the product into a damper texture or where long shelf life is the priority.
• Drier-profile cures for terpene preservation. Some operators target a slightly lower RH to protect specific terpene profiles or to prevent surface moisture during transit through warm climates. The 55% pack is the right tool for that envelope.
• Sealed packaging runs and retail pre-pack. A 100-pack case is sized for production lines that drop one humidity pack into each finished retail container. At case quantity, the per-pack cost lands well below the 6-pack or 12-pack retail display configurations.

If you are running a mixed-RH program — for example, 62% for flower and 55% for a drier strain or for concentrate accessories — you may also want a complementary case at a higher RH level such as Boveda 62% RH 320 g humidity packs for very large containers.

Integra Boost Humidiccant 55% vs Boveda 55% RH

The closest direct competitor to Integra Boost in this category is Boveda’s 55% RH 67 g pack, which uses the same two-way humidity-control concept but with a salt-water based reservoir rather than Integra’s salt-free formulation. Both products target the same sealed-container, harvest-cure and long-storage workflows, and both ship with comparable per-packet sizing in 67 g.

The functional difference operators care about is the formula. Integra Boost is marketed as salt-free, non-toxic, and biodegradable, which Integra Products positions as a cleaner option for use directly alongside terpene-rich material; Boveda relies on a salt-water solution sealed inside a permeable membrane. Both are widely used and both hold their target RH reliably when the container is genuinely sealed. The decision usually comes down to formula preference, bulk pricing at the case level, and which brand a given facility has already standardized on.

For operators who run multiple RH levels in the same room, an alternative side-by-side comparison is between this 55% pack and a 62% RH pack such as Boveda 2-Way Humidity Packs 62% RH 320 g, which targets the most common cannabis flower cure point rather than the drier 55% envelope used for storage and terpene-sensitive material.

Compatibility & Operating Range

Integra Boost Humidiccant 55% works inside any reasonably sealed enclosure where you want a stable 55% RH headspace. That includes:

• Glass jars and mason jars (typically one 67 g packet handles a 1–5 gallon vessel; smaller jars are better matched to the 4 g or 8 g sizes).
• Mylar bags, foil pouches, and vacuum-resealed bags.
• Rigid totes, vaults, and cure barrels used for bulk post-harvest storage.
• Pelican-style hard cases, humidor-style boxes, and sealed retail display boxes.

The packet does not require power, ventilation, or active monitoring — the patent-pending humidiccant matrix releases or absorbs moisture passively until the included indicator card signals replacement. Because the system depends on a sealed container, results are best when the enclosure is genuinely airtight; in unsealed or frequently opened containers, the packet will be drawn down faster and may need more frequent replacement.

For grow rooms and storage areas that also need active climate management at a room scale, Integra Boost packs are best treated as a per-container layer on top of room-level conditioning. If room ambient RH is consistently very high, a dehumidifier or a humidity-buffered drying space — for example a room equipped with a condensate pump for Ideal-Air Pro-Series dehumidifiers — will do most of the heavy lifting; the Integra Boost packets then hold each sealed container precisely at 55%.

Usage Guidelines

Each 67 g packet is sized for medium-to-large containers. Integra Products’ general guidance for the Boost line scales packet size to container volume, with the 67 g format covering the largest range of typical curing and storage vessels.

• Single 67 g packet: Suitable for sealed containers in roughly the 1–5 gallon range, including most cure jars, large mason jars, and small totes.
• Multiple packets per container: For larger vaults, barrels, or totes (5–20 gallons and above), stack two or more 67 g packets distributed around the headspace. Where possible, lay packets flat on top of the product or position them along the side of the container so moisture can move freely.
• Cure-phase use: Add the packet after the initial dry has brought the material into a workable moisture range. The packet does not replace the dry; it stabilises moisture once the material is ready to seal.
• Monitoring: Check the included indicator card periodically. When the round dot has fully transitioned from pink to blue, replace the packet. A hygrometer inside the container can be used alongside the indicator card for a direct RH reading.
• Storage of unused packets: Keep unwrapped packets sealed in their individual overwrap until use. Unopened packets stored in a cool, dry place retain capacity for an extended shelf life; once unwrapped, a packet begins exchanging moisture with its environment.

How to Install / Setup

1. Inspect the case on arrival and confirm the 100-count quantity of individually wrapped 67 g packets.
2. Identify the sealed container you intend to condition. The container must be genuinely airtight for the two-way system to maintain 55% RH.
3. Tear open one individual overwrap and remove a single 67 g packet along with its replacement indicator card.
4. Lay the packet flat or stand it upright inside the container, ideally on top of or alongside the stored material so air can move around it. Place the indicator card where it is visible through the container or on the lid for easy inspection.
5. Seal the container. Avoid opening it more often than necessary — each opening introduces ambient air that the packet then has to re-equilibrate.
6. Check the indicator card on a regular schedule (weekly during active curing, monthly during long-term storage). When the round dot has fully changed from pink to blue, swap in a fresh packet.
7. Store unused packets from the case in their original overwrap, in a cool dry place, until needed.

Sources & Further Reading