Leader Ecojet 115 Volt

The Leader Ecojet 115 Volt is a self-priming jet pump designed for reliable water delivery in domestic and irrigation applications. Built by Leader Pumps with anticorrosive, rustproof materials, it handles air bubbles in the suction line without losing prime — a key advantage in irrigation systems where partial air ingress is common. Weighing 25.32 lb and running on standard 115V power, it is a practical choice for growers, homesteaders, and facility managers who need dependable pump performance without complex installation.

Leader Ecojet 115 Volt Specifications

Core technical specifications for the Leader Ecojet 115 Volt self-priming jet pump. All values are drawn from manufacturer and supplier documentation.

Why Choose the Leader Ecojet 115 Volt

Jet pumps lose prime when air enters the suction line — a frequent problem in surface-mounted irrigation setups where water tables fluctuate or supply lines are partially drained. The Ecojet is specifically engineered for this condition: its hydraulic design allows the free passage of air bubbles while maintaining suction, which means the pump continues delivering water even when the line is not fully saturated. This makes it better suited than a standard centrifugal pump for applications with intermittent or aerated water supplies.

• Self-priming design with air-bubble tolerance: The Ecojet’s jet-pump hydraulics allow free passage of air bubbles in the suction line. This eliminates repeated manual re-priming and keeps the pump delivering water even when air enters the intake — a common challenge in gravity-fed and surface water systems.
• Thermic overload protection: The motor shuts itself down before it overheats if flow is blocked or demand exceeds capacity, then resets when the motor cools. This protects the unit in unattended installations such as remote irrigation zones or greenhouse water supply lines.
• Double sealing system: A two-stage seal separates the motor winding compartment from the wet hydraulic section. This prevents water migration into the motor over time, extending service life in continuously running applications.
• Wear-resistant shafts and impellers: The rotating components are constructed to resist abrasion from particulates common in well water or outdoor water sources. This reduces the frequency of internal maintenance in real-world irrigation use.
• Frost and icing resistance: The pump housing tolerates cold-environment conditions, making it usable in unheated outbuildings, outdoor pump houses, and season-extension greenhouse setups where temperatures can drop near or below freezing.

Best Uses for the Leader Ecojet 115 Volt

The Ecojet is a surface-mounted pump suited for water supply tasks that require reliable self-priming and tolerant handling of aerated suction lines. The following use cases reflect the domestic and irrigation applications described in manufacturer documentation.

• Greenhouse and hoop-house irrigation: Supply pressurized water to drip lines, misters, or flood-and-drain tables from a ground-level reservoir or well. The self-priming action handles the partial drawdown that occurs at the end of irrigation cycles without requiring manual re-priming before the next cycle.
• Outdoor garden and row-crop irrigation: Run drip tape, soaker hose runs, or sprinkler heads from a surface water source. The pump’s frost-resistant housing and manual switch make it easy to install in an unheated pump enclosure and operate on a basic timer circuit.
• Domestic water pressure boosting: Increase supply pressure from a cistern, holding tank, or low-pressure well for household or facility use. The 115V single-phase connection suits standard residential and light-commercial electrical panels without a dedicated three-phase circuit.
• Water transfer from open reservoirs or ponds: Draw water from open surface sources where air entrainment is likely. The Ecojet’s ability to pass air bubbles without losing prime is particularly valuable in these conditions compared to standard centrifugal pumps.
• Hydroponic system water delivery: Move nutrient solution from a sump or reservoir to growing zones in larger recirculating hydroponic setups. Pair with a 1-1/2 in. inline filter on the intake to protect the impeller from particle debris in the nutrient solution.

Compatibility

The Leader Ecojet 115 Volt runs on standard single-phase 115V / 60 Hz power — the same supply used by most residential and light-commercial outlets in North America. No step-down transformer or special wiring is required for typical installations. The pump connects to standard threaded pipe fittings at the inlet and outlet ports for integration into existing plumbing or irrigation manifolds.

The anticorrosive housing materials make the pump compatible with clean freshwater sources including well water, municipal supply, and collected rainwater. It is not rated for seawater, highly acidic, or highly alkaline solutions. For hydroponic nutrient solution use, verify that solution pH and chemical composition are within freshwater irrigation norms before continuous use.

If you are building a more complete water management setup, an Active Aqua air pump can provide supplemental aeration for reservoirs while the Ecojet handles pressurized delivery to growing zones. For systems requiring filtered water supply, the HydroLogic Micro RO system can pre-treat source water before it reaches the pump and distribution lines.

Sources & Further Reading