Mad Farmer Be One – 2.5 Gallon

Mad Farmer BE ONE is a comprehensive vitamin B1 additive for hydroponic and soil-based growing. Derived from Ascophyllum Nodosum seaweed and fortified with Humic Acids and Protein Hydrolysate, BE ONE supports plant growth across all stages and helps reduce transplant and cloning shock. The 2.5-gallon format is suited to larger operations that apply BE ONE as a routine part of their feeding program.

Mad Farmer BE ONE Specifications

BE ONE ships as a liquid concentrate in a 2.5-gallon (approximately 9.5-litre) container. The nutrient analysis and physical attributes below are drawn directly from the product label and manufacturer documentation.

Specification	Value
Brand	Mad Farmer
Product Name	BE ONE
SKU	MFBEONE2.5G
Container Size	2.5 Gallon (liquid concentrate)
Guaranteed Analysis (NPK)	1-1-1 (Total Nitrogen 1%, Phosphorous 1%, Potassium 1%)
Additional Ingredients	Vitamin B-1, Humic Acids, Protein Hydrolysate, Ascophyllum Nodosum
General Dose Rate	5 ml (1 tsp) per gallon
Foliar Dose Rate	2.5 ml (½ tsp) per quart
Dyes / Masking Agents	None
Shipping Weight	23.62 lb

Why Choose Mad Farmer BE ONE

BE ONE is a multi-input B1 supplement built around a combination of ingredients that work together to support plant health at several points in the growth cycle. Here is what distinguishes it from simpler single-ingredient B1 products:

• Vitamin B1 (Thiamine) plus seaweed base: BE ONE combines synthetic vitamin B1 with an Ascophyllum Nodosum extract. Ascophyllum Nodosum is a cold-water seaweed that supplies natural plant hormones, micronutrients, and complex carbohydrates often absent in nutrient-only products.
• Humic Acids included: Humic Acids improve nutrient uptake at the root zone by chelating minerals and increasing cell wall permeability. Their inclusion in a B1 supplement means growers do not need to add a separate humic product when running this additive.
• Protein Hydrolysate amino acids: Protein Hydrolysate provides a source of free amino acids and short peptides that plants can absorb directly, reducing the metabolic work required to build proteins during periods of transplant stress or rapid vegetative growth.
• Balanced 1-1-1 NPK: The light, equal-ratio nutrient analysis ensures that BE ONE supplements without skewing the overall nutrient balance in a reservoir or soil program. It adds a small amount of nitrogen, phosphorous, and potassium without pushing any single macro-nutrient out of range.
• No dyes or masking agents: Like all Mad Farmer products, BE ONE contains no added colorants or masking agents. The nutrient solution appearance reflects the actual chemistry, which is useful when diagnosing reservoir issues or monitoring pH drift.
• Universal compatibility: BE ONE is formulated to work alongside any fertilizer or nutrient line without compatibility issues. Growers using multi-part base nutrients or single-part formulas can add BE ONE to their standard feeding program without pre-testing for precipitates.

Best Uses for Mad Farmer BE ONE

BE ONE is categorized under Growth and Bloom Boosters within the Nutrients and Additives segment. It fits naturally into several recurring tasks in a hydroponic or substrate-based grow:

• Transplant and cloning support: The directions explicitly call out transplanting and cloning as primary applications. Diluting BE ONE at 5 ml per gallon and soaking roots before moving a plant into a new container or medium can help the plant reestablish without the wilting and stalling commonly associated with root disturbance.
• Rockwool / mineral wool cube soak: BE ONE is recommended for pre-soaking rockwool or mineral wool propagation media before seeding or cutting. The protocol is 5 ml per gallon at a pH of 5.5, soaked for 4 to 12 hours. This prepares the cube with beneficial compounds before the root system develops.
• General reservoir addition: At the standard dose of 5 ml per gallon, BE ONE can be added to the main reservoir throughout the vegetative and early bloom stages as a routine growth support supplement. The 2.5-gallon container size makes this practical for large reservoirs or multiple-reservoir facilities.
• Foliar feed application: BE ONE can be diluted to 2.5 ml per quart for foliar spraying. This is useful for delivering B1 and amino acids directly through the leaf surface, especially during stress recovery. The label recommends spraying every 7 to 14 days with a wetting agent and avoiding application in direct light or on very young plants.
• Large-scale commercial grows: The 2.5-gallon format is a practical volume for commercial or semi-commercial operations that mix large batches. For comparison, growers who run smaller test environments or personal gardens may find the smaller-format microbial root additives more appropriate for their reservoir size.

Mad Farmer BE ONE vs Similar B1 Additives

The category of vitamin B1 additives ranges from simple thiamine-only products to complex multi-ingredient formulas. BE ONE sits in the more complex end of this category, combining B1 with seaweed extract, humic acids, and protein hydrolysate in one bottle.

A basic B1 supplement contains only thiamine (vitamin B1) diluted in water, typically with no added NPK. These products address thiamine supplementation specifically but do not deliver the humic acid chelation effect or the amino acid profile that comes from Protein Hydrolysate. If a grower is already running a humic product and a seaweed extract separately, a simpler B1 product would be redundant to add alongside those. If a grower is not using those components, BE ONE consolidates them into a single additive.

The 1-1-1 NPK in BE ONE is light, but it is worth accounting for in a tightly dialed-in nutrient program. Growers running precise EC targets in a recirculating deep water culture or NFT system should factor the cumulative nutrient contribution of BE ONE into their overall feed chart. In soil or coco programs where EC sensitivity is lower, the 1-1-1 ratio is unlikely to require adjustment.

For growers focused specifically on root zone biology rather than transplant stress, a dedicated microbial inoculant such as Heavy 16 Roots targets a different mechanism and may be used alongside BE ONE rather than as a substitute.

Compatibility

Mad Farmer states that BE ONE is compatible with all nutrients and fertilizers. This claim covers both synthetic and organic nutrient lines, which makes BE ONE practical for growers who switch base nutrient brands or run hybrid programs.

BE ONE is designed for use across all common growing media: rockwool, coco coir, perlite, soil, and hydroponic systems including deep water culture, ebb and flow, and NFT. There are no media-specific restrictions in the product documentation.

The foliar spray application requires a wetting agent to improve leaf surface coverage. The label does not specify a particular wetting agent brand. Any plant-safe spreader-sticker product is appropriate. BE ONE foliar applications should not be made in direct light due to the risk of leaf burn from light refraction through water droplets.

BE ONE should not be applied to very young or highly sensitive seedlings via foliar spray, per the manufacturer’s directions. Root drench and reservoir applications at the standard dose are the recommended starting methods for new growth stages.

Growers using organic molasses-based carbohydrate supplements such as Earth Juice Hi-Brix Molasses as a companion additive will find BE ONE compatible; the two products address different mechanisms and can be mixed in the same reservoir at their respective recommended rates.

Dosing Guidelines

BE ONE provides four distinct use cases with separate dosing instructions. Each application method has a defined rate drawn from the product label:

• Mineral Wool Soak: Dilute 5 ml (1 tsp) per gallon of water. Adjust pH to 5.5. Submerge the mineral wool cube or block and allow it to soak for 4 to 12 hours before seeding or cloning.
• Rooting and Transplanting: Dilute 5 ml (1 tsp) per gallon of water. Adjust pH to the appropriate level for your medium. Soak the plant’s root mass thoroughly before placing it in the new container or medium.
• General Purpose (reservoir or hand-watering): Dilute 5 ml (1 tsp) per gallon of water. Add to the reservoir or watering solution at any stage of plant growth. No specific pH target is stated for general use beyond standard growing range.
• Foliar Spray: Dilute 2.5 ml (½ tsp) per quart of water. Adjust pH. Add a wetting agent. Apply a light mist to leaf surfaces every 7 to 14 days. Do not spray in direct or intense light. Avoid spraying very young or highly sensitive plants.

At the general purpose dose of 5 ml per gallon, a 2.5-gallon (approximately 9,464 ml) container yields approximately 1,892 gallons-worth of diluted solution. For large reservoirs of 100 gallons, that represents approximately 19 reservoir fills at the full 5 ml/gallon rate — practical coverage for a sustained run through vegetative and early flowering stages.

How to Use Mad Farmer BE ONE

The following steps describe incorporating BE ONE into a typical hydroponic or coco coir growing setup. These steps reflect the application directions on the product label:

1. Shake or stir the concentrate before measuring. As with most liquid nutrient concentrates, settling can occur during shipping and storage.
2. Measure the dose using a calibrated syringe or measuring spoon. For reservoir use: 5 ml per gallon of final solution. For foliar use: 2.5 ml per quart.
3. Prepare your base water first. For mineral wool soaks, adjust pH to 5.5 before adding BE ONE. For general reservoir use, fill the reservoir with water and add your base nutrients before adding supplements like BE ONE.
4. Add BE ONE to the prepared water or reservoir. Stir or circulate to mix evenly. The product should dissolve quickly into the solution.
5. Verify pH and EC. Check final pH and confirm it is within the appropriate range for your medium (typically 5.8–6.2 for hydro/coco, 6.0–6.5 for soil). Note that BE ONE’s 1-1-1 NPK adds a small amount to the overall EC. Adjust nutrient strength if targeting a specific EC window.
6. Apply to plants. For root soaks, submerge roots thoroughly and allow contact time before transplanting. For reservoir systems, run as normal after mixing. For foliar applications, spray in low-light conditions (early morning or lights-off period), covering the leaf surface lightly and evenly.
7. Monitor plant response over the following days. In transplant scenarios, watch for recovery of turgor and new root emergence. For foliar applications, check for any sensitivity on young tissue before continuing the every-7-to-14-day schedule.

Sources & Further Reading