The PHOTOBIO VP 18" Power Link Cable (18AWG, white) is a plug-and-play interconnect harness designed for PHOTOBIO VP LED fixtures. It allows fixture-level power connection and disconnection, reducing electrical infrastructure costs and labor. Mini IP connectors resist dust and liquid, and the UV-resistant cable is built to handle the conditions inside a vertical racking grow room.
PHOTOBIO VP 18" Power Link Cable Specifications
Key specifications for the PHOTOBIO VP 18" Power Link Cable (SKU: PTBVPJ18W) as provided by the manufacturer and supplier catalog.
| Specification | Value |
|---|---|
| Brand | PHOTOBIO |
| SKU | PTBVPJ18W |
| Cable Length | 18 inches |
| Wire Gauge | 18 AWG |
| Connector Type | Mini IP (dust and liquid resistant) |
| Cable Color | White |
| UV Resistance | Yes |
| Weight | 0.5 lb |
| Compatible Fixture Line | PHOTOBIO VP LED fixtures |
Why Choose the PHOTOBIO VP 18" Power Link Cable
This cable is purpose-built for the PHOTOBIO VP LED fixture ecosystem. Here is what sets it apart from generic interconnect cables:
- Plug-and-play at fixture level: Power can be connected and disconnected directly at the fixture without touching wiring behind a panel. This simplifies maintenance, moves, and troubleshooting in dense vertical farms.
- Dust and liquid resistant Mini IP connectors: The Mini IP connector standard provides meaningful protection in humid grow environments where condensation, nutrient spray, and irrigation runoff are routine. Connectors seat securely and resist contaminant ingress during normal operation.
- UV-resistant cable jacket: Grow rooms running high-intensity LEDs produce UV output. The cable jacket is rated UV-resistant, which matters for long-term installations where cable degradation from UV exposure would otherwise shorten service life.
- Reduces electrical infrastructure cost and labor: By moving the connection point to the fixture, the PHOTOBIO VP harness system reduces the amount of hard-wired electrical work required when setting up or reconfiguring a vertical rack system. Fewer junction boxes, less conduit, and less electrician time.
- Short 18-inch format for tight vertical rack spacing: At 18 inches, this cable is sized for linking adjacent fixtures on vertical racking where fixtures are stacked at close intervals. It keeps cable runs tidy without excess slack.
Best Uses for the PHOTOBIO VP 18" Power Link Cable
This cable is a specific-purpose accessory. It is not a general-purpose extension cord. The use cases below reflect how the product is documented in the manufacturer's harness catalog.
- Vertical racking grows with stacked fixture levels: Indoor vertical farms that run PHOTOBIO VP fixtures on multiple rack levels use this cable to link fixtures between levels or across aisles without running separate power drops to each fixture.
- Commercial cannabis and leafy-green production: Facilities that need to expand or reconfigure lighting layouts between crop cycles benefit from the plug-and-play connection point this cable provides. No rewiring needed to move a fixture.
- New PHOTOBIO VP fixture installations: When installing a bank of PHOTOBIO VP LEDs for the first time, using the manufacturer-matched Power Link Cable ensures connector compatibility and maintains the system warranty conditions.
- Replacing a damaged or worn interconnect harness: If an existing link cable shows damage, UV brittleness, or connector wear, this 18-inch model is the correct direct replacement for the VP fixture line.
For other grow-room accessories and tools used alongside fixtures, see our Gavita 8ft power cord for LED fixtures and Alchemist 99.9% isopropyl alcohol for electrical contact cleaning.
Compatibility
The PHOTOBIO VP 18" Power Link Cable (PTBVPJ18W) is designed for use with the PHOTOBIO VP LED fixture line. It uses Mini IP connectors that are specific to the VP harness system. Before ordering, confirm your fixtures use the VP harness connector format — the PHOTOBIO product line includes multiple fixture families (VP, TX, MX) and the harness connector types differ between them.
This cable is not a universal LED fixture cable. Do not use it with fixtures outside the PHOTOBIO VP family. It is not rated as a standalone power cord or wall-to-fixture connection — it is an inter-fixture link cable only.
Growers using vertical racking systems with PHOTOBIO VP fixtures should verify the number of fixtures per run and the inter-fixture spacing before selecting cable lengths. The 18-inch format is suited for tightly spaced racks. PHOTOBIO also offers longer Power Link Cables for wider-spaced or aisle-crossing configurations. Consult the PHOTOBIO VP fixture installation guide at photobio.com for full harness configuration guidance.
Usage Guidelines
This cable is a passive interconnect — there are no controls, dials, or settings to configure. Correct use depends on matching it to the right fixture family and connector count, and keeping the connectors clean and dry.
- Verify connector format before installation: Seat the Mini IP connector firmly into the corresponding port on the PHOTOBIO VP fixture. The connector should click or lock positively. A loose connector is a fault condition — do not power the system with an unseated connection.
- Keep connectors dry during irrigation cycles: The Mini IP connectors are dust and liquid resistant, not submersible. During heavy irrigation or foliar application near fixtures, protect the connector junction from direct spray.
- Inspect periodically for UV or physical damage: Although the cable is UV-resistant, inspect the jacket and connector housings at each crop cycle for cracking, discoloration, or deformation. Replace any cable showing jacket breakdown.
- Route cables to avoid pinch points: On vertical racks with moving benches or adjustable shelving, ensure the cable is routed so that rack movement cannot pinch or abrade it over time.
- Observe the manufacturer's maximum fixture-per-run limit: The PHOTOBIO VP harness system specifies a maximum number of fixtures that can be linked in series on a single power drop. Do not exceed this limit — consult the PHOTOBIO VP fixture documentation for the current rating.
How to Install the PHOTOBIO VP Power Link Cable
Installation of the 18-inch Power Link Cable is straightforward, but should be done with power off to the fixture circuit. Follow these steps:
- Power down the circuit. Switch off and lock out the circuit breaker supplying power to the PHOTOBIO VP fixture row you are working on. Do not work on live fixture connections.
- Identify the output and input ports on adjacent fixtures. The PHOTOBIO VP fixture has labeled Mini IP connector ports for the harness system. The power enters at the first fixture and passes through to subsequent fixtures via the link cable.
- Insert the Power Link Cable connector into the output port of the first fixture. Push firmly until the Mini IP connector seats fully. You should feel or hear a positive lock engagement.
- Insert the other end into the input port of the next fixture. Again, seat firmly to the lock position. Check that no pins are bent or misaligned before applying force.
- Route the cable clear of hot surfaces and mechanical pinch points. The 18-inch length is intentionally short — route it in a direct path between adjacent fixtures on the same rack level or between rack levels within 18 inches of vertical separation.
- Restore power and verify operation. Switch the circuit breaker back on and confirm both fixtures power up normally. If either fixture does not illuminate, power down again and check the connector seating on both ends of the new cable.
Sources & Further Reading
- PHOTOBIO official website — photobio.com — Manufacturer product pages, fixture documentation, and harness configuration guides for the VP LED fixture line.







Reviews
There are no reviews yet.