Shear Perfection Platinum Series Replacement Springs

The Shear Perfection Platinum Series Replacement Springs are stainless steel springs designed to restore the tension and function of Shear Perfection Platinum Series trimming scissors. Rather than replacing a full pair of scissors when the spring fatigues or breaks, this part lets you keep using the same blades you have already broken in. Compatible with six Platinum Series part numbers, it is a direct-fit replacement with no modification required.

Shear Perfection Platinum Series Replacement Springs Specifications

The table below lists the technical details confirmed by the manufacturer canonical data for SKU HGC800392.

Specification	Value
Brand	Shear Perfection
Material	Stainless steel
Weight	0.0198 lb
Compatible Part Numbers	#800375, #800380, #800385, #800390, #800402, #800404
SKU	HGC800392
Product Type	Replacement spring (scissor component)

Why Choose Shear Perfection Platinum Series Replacement Springs

Trimming scissors take wear across a full harvest cycle. The spring is the component that provides automatic re-opening between cuts, and it is often the first part to fatigue — especially when scissors are used for extended sessions or are cleaned with solvents. Replacing the spring is a straightforward repair that costs a fraction of a new pair of scissors.

• Stainless steel construction — The spring is made from stainless steel, which resists corrosion from resin, moisture, and the isopropyl alcohol typically used to clean trimming tools between uses.
• Exact OEM fit — Manufactured by Shear Perfection specifically for Platinum Series scissors. No adapting or bending to fit; the spring seats correctly in the same position as the original.
• Extends the life of quality blades — Platinum Series scissors are precision-ground and develop a familiar cut feel over time. Replacing the spring rather than the entire tool means you keep working with blades that are already worn in to your preference.
• Low cost, easy to stock — At a few dollars per unit, it is practical to keep one or two spares on hand so a broken spring during a harvest does not become a workflow interruption.
• Wide Platinum Series coverage — A single part number covers six different Platinum Series models, so most growers with multiple pairs of Shear Perfection scissors will find this spring fits more than one tool in their kit.

Compatibility with Shear Perfection Platinum Series Scissors

This replacement spring is designed exclusively for the Shear Perfection Platinum Series line. Before ordering, locate the part number stamped or printed on your scissors and confirm it appears in the list below.

Confirmed compatible part numbers:

• #800375 — Platinum Series scissor (confirm model at point of purchase)
• #800380 — Platinum Series scissor
• #800385 — Platinum Series scissor
• #800390 — Platinum Series scissor
• #800402 — Platinum Series scissor
• #800404 — Platinum Series scissor

This spring is not listed as compatible with Shear Perfection Bud series, Classic series, or Spring Loaded scissors. If your scissors are not in the Platinum Series, do not assume a fit — consult the manufacturer or use the part number lookup on the Shear Perfection product pages before ordering.

If you use Fiskars micro-tip scissors alongside your Platinum Series tools, note that spring dimensions differ between brands and the two springs are not interchangeable. Keep each brand’s replacement springs separate in your tool storage to avoid confusion during harvest.

For cleaning Platinum Series scissors between uses, keeping a supply of isopropyl alcohol on hand helps remove resin buildup that can accelerate spring fatigue and blade drag. Clean blades reduce the mechanical load on the spring and help it last longer between replacements.

Usage Guidelines

Installing a replacement spring in Platinum Series scissors is a simple field repair that most growers can perform without tools in under a minute. The steps below cover a typical spring swap for this scissor style.

1. Disassemble the scissors — Open the blades fully, then locate the pivot screw or pin that holds the two blade halves together. For Platinum Series scissors with a removable pivot, carefully separate the two halves on a clean, flat surface so no small components roll away.
2. Remove the old spring — Lift out the fatigued or broken spring from its seat. Note the orientation — which coil end sits against each blade — before removing it, so you can install the new spring in the same direction.
3. Seat the new spring — Place the new stainless steel spring in the same orientation. The coil ends should press outward against each blade half when the scissors are held in the closed position.
4. Reassemble and test — Rejoin the blade halves at the pivot. Open the scissors and release; they should spring open smoothly. If they feel stiff or do not open fully, check that the spring is seated correctly and the pivot is not over-tightened.
5. Clean before first use — Wipe blades and the new spring with isopropyl alcohol before returning the scissors to service to remove any handling oils.

If the scissors do not function correctly after a spring swap, the issue may be blade alignment, a worn pivot, or a bent blade rather than the spring itself. In that case, a full replacement pair may be warranted rather than continued component repair.

Sources & Further Reading