Sun System 10 ft Lamp Extension Cord – 16 gauge

The Sun System 10 ft Lamp Extension Cord is a 16-gauge wiring accessory designed for growers who need more distance between their Sun System ballast and their reflector. It plugs into the female lamp cord receptacle on the ballast and connects to the male plug on the reflector’s lamp cord, extending the run by 10 feet without modifying any existing wiring. When your ballast placement and reflector position don’t line up with the length of your existing cord, this extension bridges the gap cleanly.

Sun System 10 ft Lamp Extension Cord Specifications

This cord is built to match the electrical specifications of Sun System lamp cords. When adding an extension to your lighting circuit, gauge consistency is important — a mismatched gauge can affect electrical performance and may create a safety hazard. Use this cord only with existing 16-gauge lamp cord setups.

Specification	Value
Brand	Greener Gardens (Sun System)
Cord Length	10 ft
Wire Gauge	16 AWG
Connector Type	Female receptacle end (ballast side) / Male plug end (reflector side)
Compatible System	Sun System ballasts and reflectors
SKU	033636988114

Why Choose the Sun System 10 ft Lamp Extension Cord

Grow room layouts don’t always cooperate with fixed cord lengths. Ballasts often need to live outside the tent or on a shelf away from the canopy, while the reflector hangs directly above the plants. The stock lamp cord that ships with most Sun System reflectors covers a limited run — when that run falls short, a purpose-built extension is the right fix rather than improvising with general-purpose extension cords that may not carry the correct connectors or gauge.

• Designed for Sun System setups: The connectors on this cord are matched to the female lamp cord receptacle on Sun System ballasts and the male plug on Sun System reflector lamp cords. No adapters or modifications required.
• Maintains gauge consistency: At 16 AWG, this extension matches the gauge of the existing Sun System 16-gauge lamp cord, which is important for safe and consistent operation across the circuit.
• Adds 10 feet of reach: Growers who wall-mount or shelf-mount their ballast at a distance from the canopy gain the flexibility to position the reflector where it needs to be without relocating the ballast.
• Simple plug-and-play installation: The cord connects directly between the ballast and the existing lamp cord — no tools, no wiring work, no permanent changes to your setup.

Compatibility

This extension cord is designed specifically for use with Sun System ballasts and reflectors that use a 16-gauge lamp cord. Sun System is a product line distributed by Greener Gardens. The cord connects the female lamp cord receptacle on the ballast to the male plug on the reflector’s lamp cord.

Gauge matching is required. The manufacturer’s guidance is clear: match the cord gauge to the gauge of your existing lamp cord. If your current lamp cord is 16 gauge, this extension is the correct pairing. Sun System also produces lamp cords and extensions in other gauges for higher-wattage ballast configurations — do not mix gauges in the same cord run.

This cord is not a general-purpose power cord. It carries the high-frequency signal between a high-intensity discharge (HID) ballast and a lamp socket inside a reflector. It is not rated for wall-outlet use and should not be substituted for a standard grounded extension cord.

If you are running a different lighting brand or a different connector standard, check your ballast and reflector documentation before ordering. This cord is built around the Sun System connector spec. Growers pairing their ballast with LED fixtures or using non-Sun System reflectors should verify connector compatibility before purchase. For other lighting accessories, the Faven Chroma power cords are another option worth reviewing for compatible setups.

Usage Guidelines

Installing this extension cord is straightforward. The cord fits between the ballast and the lamp cord from the reflector, adding 10 feet to the total run. Before installing, confirm that your existing lamp cord is 16 gauge — check the cord jacket printing or your reflector documentation if you’re unsure.

1. Power down your ballast completely and unplug it from the wall outlet before handling any cord connections.
2. Locate the female lamp cord receptacle on your Sun System ballast. This is the port where the reflector’s lamp cord currently plugs in.
3. Unplug the reflector lamp cord from the ballast receptacle.
4. Plug the female end of the extension cord into the ballast’s lamp cord receptacle.
5. Plug the male plug on the reflector’s existing lamp cord into the male end of the extension cord. The two male ends connect via the extension’s female-to-male pass-through design.
6. Verify that all connections are fully seated before restoring power.
7. Route the cord safely — avoid sharp bends, pinch points, and contact with heat sources. Keep it clear of the plant canopy.

Growers running large HID lighting systems with multiple ballasts and reflectors may want to plan cord routing before purchase to confirm that 10 feet covers the intended ballast-to-reflector distance. If your setup uses grow tents, check that cord routing through tent ports does not create light leaks. The T5 Designer 4ft fixture is an example of a fluorescent lighting option that uses its own cord standard and does not use this extension type.

Sources & Further Reading