Titan Controls Ares Series Replacement CO2 Generator AC Power Supply

The Titan Controls Ares Series Replacement CO2 Generator AC Power Supply is the factory-matched power adapter made specifically for Titan Controls Ares CO2 generators. Rated at 1.5 Amps, 120 V, 60 Hz and UL approved, it restores your CO2 generator to normal operation when the original power supply fails — without the risk of using a mismatched third-party adapter.

Titan Controls Ares Series Replacement CO2 Generator AC Power Supply Specifications

All specifications are sourced directly from the manufacturer product data for the Titan Controls Ares Series Replacement CO2 Generator AC Power Supply (SKU HGC72493).

Specification	Value
Brand	Titan Controls
Product Type	AC Power Supply — Replacement Part
Voltage	120 V
Amperage	1.5 Amps
Frequency	60 Hz
Safety Certification	UL Approved
Compatible Generator Series	Titan Controls Ares Series CO2 Generators

Why Choose the Titan Controls Ares Series Replacement CO2 Generator AC Power Supply

When the power supply on a CO2 generator fails, using an off-the-shelf generic adapter risks damaging the generator’s electronics or causing an unsafe operating condition. This replacement is designed by Titan Controls specifically for the Ares Series, so the voltage, amperage, and connector specifications match exactly what the generator expects.

• OEM-matched design: Made specifically to work with Titan Controls Ares CO2 generators — the electrical ratings and connector type are an exact fit, eliminating compatibility guesswork.
• UL approved: The power supply carries UL approval, which means it has been independently tested and listed for safety in US electrical installations.
• Correct electrical ratings: Rated at 1.5 Amps, 120 V, and 60 Hz — the same values the Ares generator was engineered around — so you are not over- or under-driving the unit.
• Extends the life of your generator: Replacing a failed power supply rather than the entire generator is a straightforward repair that gets your CO2 enrichment system back online at a fraction of the cost of a new unit.
• Available as a standalone part: Sold separately so growers can keep a spare on hand or replace just the component that has failed without a full system swap.

Compatibility

This power supply is manufactured to work with the Titan Controls Ares Series CO2 generators. It is not a universal power supply and should not be used with other CO2 generator brands or models, as the output specifications and connector type are matched to the Ares platform.

Before ordering, confirm your Ares generator model number to ensure this is the correct replacement part. The power supply operates on standard US 120 V / 60 Hz power, so it is compatible with any properly grounded standard outlet found in indoor growing facilities, greenhouses, and climate-controlled rooms in North America.

For growers managing a complete indoor climate system, this power supply pairs naturally with the rest of your CO2 management setup. If you are also monitoring ambient conditions in your grow space, a condensate management solution like the Ideal-Air Pro Series replacement condensate pump keeps your humidity control equipment running reliably alongside your CO2 enrichment system. For air movement and circulation in the same environment, the Active Air HD 18-inch pedestal fan is a common companion piece in large grow rooms.

Usage Guidelines

This is a replacement power supply intended for use only when the original power supply included with your Titan Controls Ares CO2 generator has stopped functioning. It is not a control device and does not affect generator output or timing — it simply provides the regulated AC power the generator requires to operate.

1. Power down and unplug your Titan Controls Ares CO2 generator completely before beginning any service work.
2. Disconnect the failed power supply from the generator and from the wall outlet.
3. Inspect the generator’s power input port for any visible damage before installing the replacement supply.
4. Connect the replacement power supply to the generator’s power input port, ensuring the connector is fully seated.
5. Plug the power supply into a grounded 120 V / 60 Hz outlet. Do not use an extension cord unless it is rated for continuous duty at 1.5 Amps or higher.
6. Power on the generator and confirm normal operation per the Ares generator’s operating instructions.

Sources & Further Reading