Power Cords – 8′ – 240 Volt

The Greener Gardens Power Cord is an 8-foot, 240-volt replacement or extension cord designed to connect the male power outlet on most major-brand ballasts to a compatible 240V power source. Built with 14-gauge wire, it is rated for a maximum of 15 amps and 1,800 watts, covering the load requirements of standard 1,000-watt HPS and MH ballasts used in commercial and hobbyist grow rooms.

Power Cords 8′ 240 Volt Specifications

Specifications are derived from the manufacturer product listing and the published electrical ratings on the canonical data record.

Specification	Value
Brand	Greener Gardens
Cord Length	8 feet (approximately 2.4 m)
Voltage Rating	240 Volt
Wire Gauge	14 AWG
Maximum Amperage	15 A
Maximum Wattage	1,800 W
Weight	1.00 lb (0.45 kg)
Compatibility	Most major-brand ballasts with male power outlet

Why Choose This 240 Volt Power Cord

Grow-room wiring has to be dependable. A cord that runs loose connections or underperforms on gauge puts equipment and harvests at risk. This Greener Gardens cord addresses the core requirements growers care about:

• 14-gauge conductor: The 14 AWG wire handles the 15-amp, 1,800-watt ceiling comfortably, keeping heat build-up well within safe operating limits for a continuous-duty HID or HPS ballast load.
• Broad ballast compatibility: The male plug end matches the standard power outlet found on most major-brand ballasts, so replacement or daisy-chain setups require no adapter.
• 8-foot reach: Eight feet of cord length gives enough slack to route cleanly from a ceiling-mounted or wall-mounted ballast down to the power source without pulling taut or requiring a separate extension.
• Straightforward replacement part: When an original factory cord is damaged or lost, this cord restores operation without waiting for a proprietary OEM part. It is a direct-fit solution stocked for immediate availability.
• 240-volt rated: Running lighting equipment on a 240-volt circuit reduces amperage draw compared to 120-volt operation, which matters in rooms with multiple fixtures sharing a panel.

For growers running Gavita or other 277–400 V LED systems, note that this cord is rated for 240 V and is the appropriate choice for standard ballast-to-outlet runs in that voltage class. If your fixtures require a different voltage or connector format, see the Gavita 8ft Power Cord (277–400 Volt) for higher-voltage LED applications.

Best Uses for the Greener Gardens 8′ 240 Volt Power Cord

This cord is a practical consumable for any grow room running HID lighting or other 240-volt ballasted equipment. Specific use cases where it fits well:

• HPS and MH ballast replacement cords: The most common use. If the factory cord on a 1,000-watt HPS or metal halide ballast becomes frayed, pinched, or lost, this 8-foot cord is the drop-in replacement.
• New grow-room wiring runs: When setting up a room for the first time and routing ballasts to a 240-volt panel or timer box, having spare cords on hand allows flexible positioning of fixtures independent of outlet location.
• Multi-light rooms: Facilities running several ballasts off a 240-volt circuit benefit from standardized cord lengths. Uniform 8-foot cords simplify cable management and reduce clutter compared to mixing various cord lengths.
• Backup inventory: Commercial operations and serious hobbyists typically keep at least one spare power cord per ballast. Electrical failures during a critical growth stage can cost a full crop cycle; a spare cord is inexpensive insurance.
• Upgrade from undersized cords: Lower-gauge (thicker-number) cords run hotter at high wattages. Upgrading to this 14 AWG cord on ballasts previously running marginal wiring improves safety margins and reduces risk of heat damage at the connection points.

This cord works alongside other grow-room accessories. If your workspace also requires precision cutting tools, the Fiskars Micro-Tip Replacement Scissor Springs are a related item available in the same Tools & Grow-Room Accessories category.

Compatibility

The Greener Gardens 8-foot 240-volt power cord is designed to plug into the male power outlet found on most major-brand ballasts. The manufacturer description states compatibility with “most major brand ballasts,” which in practice covers the standard IEC or twist-lock style male outlets used by common HID ballast manufacturers including brands such as Lumatek, Phantom, Digital Sun, and similar designs sharing the same connector standard.

Electrical parameters to verify before use:

• Confirm your ballast is rated for 240-volt input and that your circuit supplies 240 V.
• Verify your circuit breaker supports at least 15 amps for this cord’s rated maximum draw.
• The cord’s 1,800-watt ceiling covers standard 1,000-watt and 1,500-watt ballast loads with headroom. It is not rated for loads exceeding 1,800 watts.
• For ballasts designed for 277–400 V supply, this cord is not the appropriate choice. Consult the ballast manufacturer’s documentation to confirm required supply voltage and connector type.
• Wire gauge 14 AWG is suitable for runs up to 8 feet at 15 amps. Do not splice additional extension cords onto this cord to extend the run beyond the rated length without engineering review.

If you are operating a 277-volt or 400-volt fixture, see the Gavita 8ft Power Cord (277–400 Volt) which is built for those higher-voltage applications.

Sources & Further Reading